Dryer turns off after a min an has f 22 flashing its a kenmore elite oasis

http://www.bing.com/videos/search?q=kenmore+elite+oasis+st+dryer+won't+heat+is+there+any+videos+or+manual+to+fix&qpvt=Kenmore+elite+oasis+st+dryer+wont+heat+is+there+any+videos+or+manual+to+fix&FORM=VDRE

check heater element

Drive belt and or drive motor is gonzo.

Press and hold the "Start" button to restart the dryer cycle if the "PF" (power failure) error code appears. This code often appears when a cycle is interrupted before it completes. You may also check the breaker or household fuse, and ensure the machine has not come unplugged.


Read more: How to Repair Kenmore Elite Oasis Dryer Error Codes ' eHow.com http://www.ehow.com/how_7703883_repair-oasis-dryer-error-codes.html#ixzz1u

Hello,

Check the vent on the back. This is indicating a air flow issue. If the vent is clear ohm the heater out check it for continuity.


You can watch a video that explains how to complete this repair on your sears Kenmore Elite clothes dryer at the link below.

Sear Kenmore Dryer Video

about $10.00 for the thermal fuse and 1 Hr Labor (my rate is $30.00 per hour) and a service call,rate depending on where you live

F40 = thermal fuse blown.
If the fuse is OK the error points to a communication problem between the machine control board and motor control board (check connectors).

check if basket turns freely. if it does replace the main board

kenore elite oasis dryer won't start, when start button is held down it flashes F, book says call service center

searspartsdirect.com - and enter your model #.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.