Hello i flashed my phone with th k810i software for sony ericson but after flashing i can recieve my calls but i cannt do anything like checking my phone its telling me configuration error please contact your network operator
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000 Default 6 Digit Security code: 123456 or 000000
Type *#06# at the mobile screen to know IMEI no of your mobile. send the IMEI no to me and i will reply you with unlocking code. IF Problem not Solved So Please New Software install in the Phone Problem will Solved
If For puk & pin cod problem So Please Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator Enter The Puk code and Yes Enter The pin code and Yes So Puk code Open and Problem will Quickly Solved
There is the Sony Ericsson Update Service (details on the SE Webiste) however this will only update the firmware, it won't re-install the firmware. Specific equipment is required to flash the firmware on a SE K810i, you will need to take the phone to a reputable mobile phone engineer or SE Service Point.
For soft reset type *#7780# For hard reset type *#7370# and if it ask passcode enter the passcode as 12345 as default.Please backup all your data if you performing hard reset because hard reset deletes all data on your phone like contacts,messages,music,videos and photos
goto sony ericsson website and click on SUPPORT link and download the software, and follow the instructions after installing it on ur pc and then It will prompt u to connect the phone thru USB and it takes 30mins to update ur phone software.
the connection of the phone to the circuit board of the phone must have been shaken a bit so you will need to open up the phone itself and connect it back to the circuit board (you should get a professional to do this
First thing is never remove the cable without stopping the USB connection from system tray. Now, as your phone has gone kaput, you will have to re flash the firmware. Checkout some SE forums like esato.com,se-nse. Use a memory card reader to copy the contents of your m2 and don't keep it inserted in the phone while flashing.
If your phone is still under warranty, i suggest you take it to the service center.