Question about D-Link DIR-625 (790069292637) Wireless Router

1 Answer

Cannot configure D-Link DIR 625 wireless router

I have D-Link DIR 625 which I has configured and was working fine. Suddenly has stopped working. Now it cannot be detected by wireless as well as wire line network adapters.
When I power on the Router
- Power LED ( First from left)
- Internet LED (3rd)
- Local Network LEDs( All four)
are on.

I've tried resetting the Router but still I'm not able to configure the router. Please help what should be done to configure the router.

Posted by on

  • 1 more comment 
  • raj b Jun 01, 2008

    Solution didn't worked for me.
    When i switch on router above mention lights where on.

    When i connect network cable to my PC's network card's light doesn't blinks.

  • flyballpups Aug 07, 2008

    I am having the same problem.

    I hooked up the D-Link 615 two nights ago. Yesterday it worked fine for me - one pc wired direct to a lan port on the router, and my laptop via wireless. This morning when I went to go online, no connection from either computer.

    From the pc that is wired to the router, I ran ipconfig and rec'd the error: Media Disconnected. The router has some lights on in steady-state - power, internet connection and the 4 local network LEDs. The status led, wireless led and the globe are out. I tried unplugging/replugging in both the cable modem and the router. The router keeps returning to this state and will not reset.

    I have unplugged everything from the router and plugged only the power back in. It comes on in the same state, does not reset. I tried the reset suggestion mentioned (unplug, reset for 10s, plug back in while holding reset in for 20s more). No change, still all the same lights are on.

    Currently I only have the power cord plugged in but all these lights on. I tried with just the computer wired to the router with the network cable that came with the router - so should be new & working. I was unable to connect to the admin page. Again, all was fine yesterday, not sure what happened overnight to change all this.

    The other network cable I have, I am currently connected directly to the cable modem with it, so I know that both those pieces are working.

  • tobiwalex Dec 15, 2008

    i have reconficure my dlink wireless router but still not accessing the internet please kinly help me out



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Hey Raj - Unplug your modem and router. After 60 seconds plug your modem back in. When the lights return to normal (except the activity light) , plug your router back in. Give it 10 seconds and try it. If this solves your problem PLEASE rate this as fixed. If not, DO NOT RATE YET. Just add a comment letting me know what happened and I'll be happy to assist you further. Thanks.


Posted on May 31, 2008

  • Jeffrey Pemberton
    Jeffrey Pemberton Jun 01, 2008

    Ok - when you say you reset it, I assume you used the reset button and followed the instructions. If you didn't let me know. If you did, try this other way of resetting. Unplug the router, press in the reset button for 10 seconds but don't let go. Plug the router back in and keep holding in the reset button for 20 seconds. Then release the reset button. Try your router interface page after 30 seconds. Let me know what happens.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections. The...


Please try to access the router's configuration page by accessing using a computer that is wired on the router.

Default admin user name:Admin
Default admin password:

Please update firmware:
Note:Please do not upgrade the firmware over wireless connection. Anyway you wont be able to do that now but for future reference. Please use the link on the bottom.


DIR-625 rev C:

Jul 10, 2011 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

I have a Westell DSL modem & a D-Link DIR-625 wireless router. Everything has worked fine for years but a few days ago the Internet connection went down. I contacted AT&T for support. During the...

you need to configure the dsl modem to be on bridge mode after you did it successfully. that is the time you configure your d-link for you to connect to the internet.
call first your ISP to configure the modem to Bridge mode after that call your manufacturer of the dlink for them to configure your connection

Jun 11, 2010 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

DIR-625 (790069292637) Wireless Router: my router DIR625 is working for my desktop but not...

your router must be configured by your ISP so that it will be personalized and let them configure the laptop for wireless connection

May 17, 2010 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

How do you hard reset and reconfigure a D-Link DIR-625 rangebooster n router?

There is a small recessed button on the back of the router. Hold it in with a paper clip or something like that for 10 seconds. Your router will be reset to "as shipped" configuration.

Apr 03, 2010 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

D-Link DIR-625 can not broadcast wireless continously


Jul 19, 2009 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

D-Link DIR-625 - wireless problem

with your situation you can see the wireless network but cannot connect you have to change your DNS.
*that will depend on your operating system.

Jun 17, 2009 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

I have installed 2 delink routers for my Mac, I still cannot get on line. the mac is new, what is the problem?

Try to configure the DIR-625 wireless router. Connect your computer to one of the LAN port to one of the router. Then access the IP address of the router ( configure as dynamic IP then clone the MAC address. Make sure that you modem is connected to Internet port section of the router. Check the Internet connection after the configuration leave the other behind check the connection of the main router before installing the other one.

Mar 10, 2009 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

D-Link DIR-625

What you need to do is long into your router's configuration. For the D-links, all you have to do is open internet explorer. Type in on the address bar and press enter. Once you get into the log in page, type in your username and password (not the same one as your wireless password). If you don't know. Try admin for username and leave password blank. It should work if you have not change the default password. Once inside the configuration page. Go to Advance, click on QoS engine on the left. Input the IP address of the VoIP box in the "source ip" , type in a name for your rule and select 1 for priority and input your ports for your VoIP box. The best thing you want to do is put your VoIP box before your router. That way you get better quality.

Oct 02, 2008 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Use with dwl-2100ap

What you need to do is configure the dwl-2100AP. You need to login into the repeater's configuration page and go to Home tab, click on wireless on the left. Select AP Repeater under Mode. A new screen will show up. Click on the scan button to see if your router's signal is being picked up in the box. Just select the signal if you see it in the box and put in your security info if you have one.

Sep 01, 2008 | D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?
D-Link DIR-625 (790069292637) Wireless Router Logo

Related Topics:

1,851 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18419 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides