Question about Canon imageRUNNER 3300 All-In-One Laser Printer
My IR 3300 display E000051-000 please help me
E000051-000 is not a waste toner full error code thats E000015. This error code refers to the horizontal registration sensor not reaching home position or is not detected when the assembly is commanded to move. The sensors function is to determine the edge of the sheet of paper in the front to rear direction to determine the write position on the drum. It is not somthing you can fix and would require a tech. Possible sources of the error are, DC controller, horizontal registration sensor or actuator, or the horizontal registration motor. Based on experiance the motor is either stuck or burned out so the sensor does not move at start up
Posted on Jun 07, 2008
Your ink waste tank is full. If its a new printer or you know it can't be full.. you can reset the printer with these steps.
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
To avoid this problem don't use remanufatured cartridges or fill your own. Buy brand new cartridges.
Hope this helps.
Posted on Jun 01, 2008
Tips for a great answer:
Oct 08, 2015 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...
Jun 27, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
May 21, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
May 20, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
Apr 23, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
Jan 16, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
Feb 15, 2009 | Canon imageRUNNER 3300 All-In-One Laser...
Feb 13, 2009 | Canon Printers & Copiers
Dec 25, 2007 | Canon imageRUNNER 3300 All-In-One Laser...
1,329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: