Question about LG WM-2277HW Front Load Washer

1 Answer

The sound on my washer is no longer working. Typically, when I press the power button, it makes a series of tones when the washer is turned on and when it's turned off. It also used to make a tone when I would turn the dial or a series of tones when a cycle finishes. It no longer makes any sound. However, the lights on the various buttons and dials work fine. Any idea on what would have happened to the sound and/or how to fix the issue?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • LG Master
  • 2,159 Answers

Your model has a button labeled beeper. Put that on high.

Posted on Jul 04, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 105 Answers

SOURCE: Troubleshooting your problem LG Washer

you may find that you need to dismantle the pump as you can get things inside the impellor area causing intermitant problem

Posted on Jan 28, 2008

  • 210 Answers

SOURCE: buttons not working on lg washer

Could also be that the board has not been screwed on tight enough so it has a bit of play in it. You would have to check to see if the boards that are behind the display panel are on correctly.
It could also be a defect in the board.

Sgt 48

Posted on Jun 02, 2008

cj2176
  • 520 Answers

SOURCE: my lg washer turns on but i cannot select which cycle I want

The LG washers are very buggy. Yes buggy. They have an on board computer that to this day still has issues. This sounds to me like the computer is confused about cycle changes. The component is also quite difficult to change. On ether side of machine are screws that need to be removed to lift lid. There are 3 modules inside. you will need to look at the wires to see where the largest sum of wires come together. That will be the main unit. Hope this helps. Good luck.

Posted on May 07, 2009

SOURCE: LG front loading washer is turning itself on,then off

You have a fault microprocessor, or the "Brain" is sporadically faulting... You need to get this looked at... it isn't a minor thing unfortunately... look get a firm "Quote" from a reliable service center man

Posted on Feb 01, 2010

Nomodo4u
  • 863 Answers

SOURCE: button to turn on machine works but once i pick

You gotta replace the board, which is spendy unless its still under warranty. Might I suggest exchanging it out for a GE or Whirlpool?

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I unlock my Coby Series MID7034 Forgot the pass code?


This procedure will delete all items (files) and entries on the MID7015-please back up files on your computer if possible first. This is a Master Reset Procedure.
  1. Power the unit off. Press and hold the "Power Button" till the "Device Option menu appears.
  2. Click "Power Off" and select "OK"
  3. Once the unit has been turned off. Press and hold the "back" button(silver tone button) and "power" button simultaneously for eight seconds.
  4. When the Android Icon and warning triangle appear , press the "back" button )silver tone button) once.
  5. The Android recovery screen will appear. The "Home/Menu" button will allow you to scroll up and down.
  6. Press the Home/Menu button to scroll to "Wipe Data/Factory Reset" Then press the "back" button
  7. On the next screen Scroll to "yes-delete all user data" Press the "back" button.
  8. On the next screen Choose "reboot system now" and Press the "back" button.
  9. You will now be able to access the tablet.

Sep 17, 2016 | Coby MID7036-4 7" Capacitive Multi-touch...

4 Answers

Yamaha RX V671 will not turn on anymore after a power outage


The protection mode has activated.
Reset the protection mode as follows and see what happens.

Connect power cord to mains and wait 5 seconds or so. While holding down "info" and "tone control" buttons, press "main zone" power button briefly and release, but keep "info" and "tone control" buttons pressed for at least 3 more seconds. The unit should power up. Assuming the reason for the protection has passed or been fixed, the unit can now be turned off and then back on with the "main zone" power button to restore normal operation mode.
If the protector activates again, the fault is still present and the unit needs to be repaired, ideally by a Yamaha authorised repairer.
There are dangerous voltages present in high power amps and a lot of grunt in terms of stored energy - best left to trained technicians.

Apr 10, 2012 | Yamaha Audio Players & Recorders

2 Answers

How do I acitivate it


Charge your headset
Charge the headset's battery fully before using the headset for the first time.
1 Put the headset in the supplied charging case and close the cover.
2 Plug the travel adapter into the case's charging socket.

Put your headset in pairing mode
1 Ensure that the headset is off (see Turn headset on/off below).
2 Press and hold the Multi-Function button until the indicator light turns on in blue (approximately 8 seconds).

Turn on Bluetooth on your phone and pair with headset
1 Set your Bluetooth phone to discover the headset by following your phone's guide.
Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices. Your phone will find the Samsung WEP200
headset.
2 Select Samsung WEP200.
3 When the phone asks if you want to pair with it, confirm by selecting Yes or OK.
4 Enter the headset passkey or PIN, 0000.

Your phone and headset are now paired and ready to make and receive calls.
1 Place the headset over your ear.
2 On your phone, make a call to the number you want.
3 If your phone and headset are successfully paired, you will hear ringing on the headset

After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.

To turn the headset on
Press and hold the Multi-Function button for4 seconds until you see 4 blue flashes on the indicator light, then release.You will hear a tone and see the indicator light flashes while the power is on.
To turn the headset off
Press and hold the Multi-Function button for 4 seconds until you see 2 blue flashes on the
indicator light, then release.You will hear series of 2 tones and see the indicator light stops flashing.
http://ars.samsung.com/customer/DownloadAnsTempl?AT_ID=70171&SEQ_NO=2

Jun 07, 2011 | Samsung Bluetooth?® WEP200 Headset...

1 Answer

My motorola has an emergency alert button on top, when pressed and held it sounds an alarm on all other radios near it. we pushed it to test and it works well and is a cool feature. however, the call tone...


Your radio may be functioning normally for the emergency alert. Here is an excerpt from the user guide:

Emergency Alert Mode

The Emergency Alert feature can be used to signal members in your

group of your need for urgent help. MR series radios will operate in an

automatic "hands-free" emergency control mode for a total of 30

seconds after activating the Emergency Alert. MR series radios in your

group will automatically advance the speaker volume to the maximum

setting and sound a warbling alert tone for 8 seconds. The alert tone is

emitted from your own radio speaker and the receiving radios in your

group. After the 8 second alert, any spoken words or incidental sounds at

your end will be transmitted to the group for 22 seconds. For the 30

second duration of Emergency Alert mode, MR series radio controls and

buttons will be locked to maximize reception of the emergency message.

1. Press and hold the Emergency Alert button for 3 seconds.

2. Release the button after the LED Indicator glows red and the alert tone

begins to sound. There is no need to continue to hold the Emergency

Alert button or use PTT for your message to be transmitted.

3. After the alert tone ends you may speak into the microphone. Your

voice or incidental sounds will be transmitted. The LED indicator will

continue to glow for the duration of the 22 second period.

4. After 30 seconds your radio speaker will emit a Talk Confirmation

Tone and the LED Indicator will extinguish. Operation then returns to
normal two-way mode.

Note: All Motorola Talkabout EM, MJ, and MR series radios are fully

compatible with the Emergency Alert feature. Radios other than EM, MJ,

MR series can receive the emergency alert signal, but will not respond

with adjusted volume settings, locked controls, or a warbling alert tone.

Users of other radio models set to the same channel and Interference

Eliminator Code will hear a steady tone for 8 seconds followed by the

voice transmission for 22 seconds.

Warning: The Emergency Alert feature should only be used in the event

of an actual emergency. Motorola is not responsible if there is no
response to the emergency alert from the receiving group.

Here is a link to the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/MR350-351%20User%20Guide%2012-16-08%20KEM-PK14190-90.pdf

Best regards.

Oct 22, 2010 | Motorola MR355R Two Way Radio

2 Answers

I need to turn of fwd/dnd


Take the handset off the hook, then press the FWD/DND button followed by 0 (zero). When you hear the tone, hang the handset back up. This will work with the PT (Panasonic Proprietary telephone) system. (Alternatively, pick up the handset, press 7 (seven) 1 (one) 0 (zero) 0 (zero) and hang up after the tone. This works for PT and SLT phones (single line telephone))

The same sequence works to cancel call forwarding (except for follow me forwarding). In the Follow me mode, pick up the handset, press FWD/DND or 7 1 0 followed by 8 and the extension number. Then hang up after hearing the tone.

I hope this helps.

Cindy Wells

Sep 23, 2010 | Panasonic KX-T7130 Corded Phone

1 Answer

Rotary tone on GE 6.0 cordless phone won't turn off


From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-menu.
2. Press mute/program button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is “1 TONE”.
3. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE.
4. Press the mute/program button to confirm. You will hear a confirmation tone and your selection shows in the display.

Feb 06, 2009 | Uniden Cordless Phone

1 Answer

Sound is off


make sure the copy button is on.
to turn of the beeps
then press function - 1- start- 9-0-0-0-start -9-start-1-start stop

Jan 08, 2009 | Panasonic DP190 All-In-One Laser Printer

1 Answer

Phone button tone replaces dial tone


You first need to determine if it is THAT phone or the jack it is plugged into. I would swap the phone with another in th ehouse and see if the problem stays with the phone or stays with the jack. If its the phone take it back or trash it. If the problem is the jack and if you have "lines keeper service" the phone company will repair the jack for you. If you do not have the inside wire insurance, ask the phone company how much it will cost to repair. You may want to get a private technician that will fix it for you for much less. Good Luck

Dec 23, 2008 | Lands Phones

1 Answer

Steady tone coming from ghw9150pw0


could be problem in control bd not necessarily a problem with function but something in sound circuit ck for a sound control button on keypad it may say something like alarm volume or on off try holding it down after turning power on if you notice any change in volume or tone of sound shows you're on right track only thing is solution may mean new control bd

Sep 04, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
LG WM-2277HW Front Load Washer Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...