Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

Does the GE harmony dryer have a blower motor that is driven by a belt?

Posted by on

  • kevantkelley Oct 10, 2010

    okay, since this model has no belt. What would cause it to have a burnt smell and noise coming from the drum while running?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 7,482 Answers

No normally the blower is not driven by a belt, it is a motor with a blower wheel attached on the end of it...if the blower motor is not working then you will have to replace the blower motor

Posted on Oct 10, 2010

  • Curtis Sewell
    Curtis Sewell Oct 10, 2010

    The noise coming from the drum is probably caused by faulty drum rollers either they have flat spots on them or they are in need of lubrication. To lube the bearing use a good grade of machine oil such as 3inOne.
    If your model does not have drum rollers then it maybe the rear bearing is getting noisy and needs replacement.
    The burning smell may be coming from the drum belt slipping, or maybe if the blower is not working properly, then it could be the lint inside of the dryer or worse, in the vent tubing starting to burn...could be a fire hazard if both are not cleaned out.
    This is a good website for parts:http://www.partselect.com/

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Profile Harmony DPGT750EC Electric Dryer not heating


inverter board may be bad. how long have you had the machine

May 07, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Ge electric harmony dryer fan motor not turning just moves side to side 1/4 of an inch back and forth . fan freeweels free, if i spin it buy hand.


with belt off see if motor free spins .the blower wheel should not free spin with the belt on and entire drum will turn with it otherwise you could have a bad motor and a blower wheel

Jan 24, 2010 | GE Profile Harmony DPGT750GC Gas Dryer

3 Answers

How do you disassemble a GE harmony dryer


remove rear pannel and the motor is right there remove drum to acess the motor
remember to lay the dryer on an angle or even flat on it's face if you can to re insert the drum assembly and dont forget the belt

Jul 29, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Harmony Elec. Dryer Blower Stops working or won't start up


Do this.

press "Home"
press "Help"
press both "My Cycles" and "Back" at the same time and hold them until service mode pops up.
It will tell you what's wrong.

Jul 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Ge profile harmony gas dryer- no air flow in or out no heat


Replace the blower motor. Check condition of blower wheel and replace if found defective

Jan 16, 2009 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

Blower motor access


You cant you have to remove the control panel, dryer top, top heat shield, dryer front, front drum support, belt, and then the drum in that order to get to the heater. I have been working on these since they have been out and have never changed a heater in one, They just dont burn out. Unplug the dryer and take the access cover off where the power cord attaches to the dryer and make sure the wires are not loose or burnt.

Jun 01, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Blower Motor not working


This is not a board issue.It sounds like the blower is either broken or fell off the motor.Remember your dryer has 1 motor.On one side is where the belt is attached,and on the other side your blower is attached.

May 18, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Dryer not heating!! Harmony dpgt750ec


If you have tried all the normal fixes for the harmony dryer you might be having a problem with your blower motor. To check, remove your dryer vent and start the dryer. If you have no air moving then your blower motor has stopped. When the blower motor is not running then your dryer will not heat. This is one of a few models that have a seperate motor for the blower so most techs will miss this. Good luck to you, mca0824@aol.com

Apr 26, 2008 | GE Profile Harmony DPGT750EC Electric...

3 Answers

GE Profile Harmony Gas Dryer DPGT750GC1PL not heating


post your email i will send you the book there are too many things to check via posting here

Mar 09, 2008 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

JP Services
JP Services

Level 2 Expert

310 Answers

Cindy Wells

Level 3 Expert

5160 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...