I have an RCA F36650 TV that suddenly powered off yesterday, now when I try to power it back on the green power light comes on for a second, blinks twice then nothing.
Any suggestions as to what this could be?
I have a 52in RCA 2005 as soon as my warranty was up it started acting up now it won't turn on it it takes 3hours of messing with it,the green power light comes on then goes back out. What could it be? It started by just shutting down during show but now 4 months later it won't power on.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where, if otherwise, Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement. I hope this will help in solving the problem...
Ur convergence is dying or well be dead.3D pics or shutdown.U must know how to solders? The parts in convergence board must change like ICS,and all it resistors.The websites Tv Repair World.com,Tvrepairkits.com for the convergence kit.The shop will cost u $300 for parts and labors.
Your concern with an RCA D52W26 is when you attempt to turn it on, it powers up as indicated by the LED lights but they then power OFF a few seconds later? or it powers on then you get to see bright line(s) left to right, then the TV powers OFF? or it powers on but only bklinking LED lights? If yes on the last any sequence to the flashing/blinking?
Hope that this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
What part did you remove? and what numbers are you trying to find. post them, and I might be able to do a cross reference.
It sounds like you have a power supply problem, check the fuses on the AC board and the check the voltages on the main PS board.
I hope this helps.
If you have your manual, the manual may have the error codes in them, otherwise you can search online for the error codes or post the model number here so that we can help you find the correct manual or list of codes, but yes the lights are an error code.