Question about Frigidaire 24 in. GLD2150RCC Built-in Dishwasher

1 Answer

CL keeps blinking

When I attempt to start a new cycle, "CL" blinks, along with the sensing and washing lights. No cycle starts. Nothing is blocking any moving part inside.

Posted by on

  • cory_bricker Apr 26, 2009

    I had the same problem and flipped the circuit off then on and it fixed it

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Shut down electric to dwasher to reset board

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Updated details: Normal cycle keeps blinking


Have u tried unplugging it for about 2m and plug it bk in that will master reset everything like u just bought it and see how that's works out

Sep 18, 2015 | Dishwashers

1 Answer

I have a Frigidaire dishwasher model # FDB2415LFSO with a blinking CL code. When I try the normal wash cycle button the drain pump runs and the CL light blinks continuously and nothing more happens. The...


Good Afternoon friend, thank you for your post!

Based off what you have described you have performed multiple tests to your Frigidaire dishwasher and it continues to display a "CL". That code does stand for close door which can mean that the door switch is sensing it is opened. For this error code it could be a possible problem with your door switch or main control. I understand you stated that the control did not appear to have a burn inside of it so it is easy to assume that the door latch could be the issue. Remember if you are not a professional technician this could be the start of unnecessary part purchases. I hope this information is helpful to some degree. -Matt

Feb 24, 2015 | Frigidaire Dishwashers

1 Answer

Dishwasher wont finish any cycles


That blinking light is trying to tell you that there is something wrong with the dishwasher. You need to fix the problem or else that blinking light will come back. And the number of times it blinks (before it pauses and repeats) will tell you (or a technician) what is wrong. How many times does it blink?

Jul 04, 2014 | Kenmore Dishwashers

1 Answer

All Cycle Lights on with one blinking sometimes working often not working.


1) tight the connector wires very well and clean with spray contact, of course unplugged the machine
2)resolder all point from the board for colder joint
3) Try again.
4) If the problem persist the problem is the board defective.
5) Call some service tech.
God bless you

Jun 19, 2012 | KitchenAid KUDS301V Dishwasher

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

2 Answers

Clean light keeps blinking and I can't start a new cycle


That is a comon problem with that model. It is not sensing a temperature change in the water.

Push i believe it is heated dry and sani rinse going back and fourth between the two to clear the code and see if you can get it to complete a cycle. If it doesnt call sears and schedule service there is a service flash repair that should not cost you anything to repair the unit.

Nov 13, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Whirlpool quiet partner I won't run just keeps blinking


is the cean light blinking 7 times and then repaeating?? If so this is a water heating fault and means that the computer sensed that the water temp didnt rise just 3deg in the last main wash cycle. If its not blinking 7times then repeat, it sounds like the user interface (membrane switches) have failed. Let me know more and i can help.

Apr 19, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I just read this for the same problem: push sanitize, then heat and dry, sanitize, heat and dry, sanitize, heat and dry, cancel, then open and close the door. It worked. The dishwasher is running correctly even as I type this. 

Feb 11, 2008 | Kenmore 24 in. 17262 Built-in Dishwasher

12 Answers

Clean light keeps blinking and I can't start a new cycle


Puppa, clear the fault by pressing the keys in this order: high temp scrb--air dry--high temp scrub--air dry. Or, depending on your model..Sani rinse--air dry--sani rinse--air dry. The dishwasher will enter the service mode. Let it do it's thing or advance it through it by pressing the start key. The fault came from the board not sensing a rise in the water temp. Make sure to run the hot water before starting the dishwasher. The heating element runs through the nuetral side of the door switch so make sure the d/w is level and the door switches are all making. The element itself could be at fault. Catriver...post back

Apr 01, 2007 | Kenmore 24 in. 15932 Built-in Dishwasher

Not finding what you are looking for?
Frigidaire 24 in. GLD2150RCC Built-in Dishwasher Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Carmen Mikulic

Level 2 Expert

409 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...