Well., my keypad or what back lights remain lighted even if the phoneis turned off.. when i put the battery, it automatically turns on anddoesn't turn off.. what shud i do.? its very battery consuming... :(please help..
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: 3230 keypad lights...
This is just because the settings of display are not right. got to your phone's display settings and adjust the display backlight setting to 15 seconds or 10 or whatever.. If its still not fixed then you may have to update your phone's firmware..
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
tke out the battery then get an eraser just rub the battery connector sideways....be careful not to dislocate the connector.....and put the battery back-in...u're phone work after this...just email me firstname.lastname@example.org if it works.....
I suggest to change with an other UI boards it's more easy.Actualy the problem come from flexyble cable specially in camera line.It's often happen.If you an expert track the line between camera connector to flexyble connector.Usuall one or two line are not connected well. I hope it help.
i have only had the Q9C but i think with the all the Qs the keypad has a automatic light sensor in dark rooms the lights should bright and in light the lcd and keypad should go off and get dim
i dont know were exactly u may need to dissable the smartback light and press the lcd off light
or u may need to take it in and see if the a cell repair place can fix it i have the same problem with my Q9C i am looking now and its either my windows mobile or candlelight app but u may need to take it in
Just put the charger in the device and then soft reset it light will turn to yellow. if this dosent work try to put the charger and then remove the battery and put it back to phone while the charger need to be remain connected.this is gonna work
I got the same problem. I even tried to plug the battery to the second battery charging slot, still couldn't get it back to life. But the Ipaq screen lights on with progress bar progress for about 5 seconds, then dead again. I even doubted the battery was toasted. I gave it a final shot: 1. Remove the battery, and then put it back. 2. While the screen lights on, within 2 seconds, cold reset the unit by press the hole with stylus and push the power button at top in the same time. In my case, the progress bar will keep going until I see the tap screen instruction and everything back to normal. But it reminds me that the removable battery is totally discharged. So I put it in cradle and I am able to synch it with my PC. Everything seems o.k. while it sits in the cradle, except the charging light won't turn red. When I remove it from the cradle, it still lights on, battery shows 99% which is healthy. but when I turned it off, it won't start anymore. I have to repeat the above steps to revive it. Sometimes I have to remove the battery and wait for a while and then put it back, so that the screen can light on to give me chance to cold reset. Conclusion: Maybe need a new battery. I will check Ebay to get one. Please post if you have other solutions.