Question about Night Owl Optics Aero NOAR25 Monocular

3 Answers

Night owl / night vision

My night vision has been dropped now refuses to work it turns on the ir lights but nothing is seen inside is the bulb gone

Posted by on

  • Anonymous Mar 15, 2014

    vomz night vision scope, was working great then slowly went dark, now nothing, just the red cross can be seen.

  • Anonymous Mar 15, 2014

    vomz night vision gun scope, was working great then slowly went dark, now nothing, just the red cross can be seen.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 18 Answers

Unscrew front lens front of intensifier tube should have an even bronze tinted coating on glass if it is grey and blotchy the tube is degassed. common fault with this model nightvision
wayne

Posted on May 31, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Nothing is impossible nowaday, if you have dropped your night vision, then it is minor problem,just find a repairer nearby or there must be Yukon service centre in area, they can fix it.

Posted on Mar 08, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

Inside the night vishion there is a tiny tv tube,,,if you have droped yours i bet that tube has broken,,,if you droped your house tv what do you think would brake in that? its glass you know!

Posted on Jul 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont have a manual with my paramount night vision. how do you operate it. i can get a red light but thats all.


Hello, You should have two switches, one for on/off and the other for IR intensifier (red). There should be or not two LED one green to indicate on/off--no green LED it off, if the green LED glows green it on. The same with IR luminator, red is glowing the IR is on, if not glowing red, it off.

Make sure you have new batteries and make sure that the polaity is correct---positive +,
negative -.

Push the on button, if you push the right button the green LED will glow, then push IR button. Put you hand in front of the monocular and see if there is a red glow on the palm of you hand, if there is then the IR is on. Never look into the IR lens. Now you can look through the eye piece.

Now, if there no green tent inside of the monocular then there are other problems with you NV devise.

Never, and I mean NEVER look at bright light at night or in the daylight. This will destroy the image tube. That is one reason why they are call night vision....Only for viewing in the dark. stewbison

Aug 08, 2011 | Bushnell MOONLIGHT Night Vision -...

1 Answer

Cannot see thru optics. ifr comes on but still cannot see any image? can the back of the night vision come off to check the power illum light?


Hello, so the image intensifier tube light up. Shake it and listen for parts raddle around inside.
How long have you own this Night Owl? Have you been using night vision on bright lights?
If you have the intensifier tube is gone back to the Red Star....it died! The IR operates on a different switch than the controler, ccfl inverter, multiplier, image tube. Sorry. stewbison

There is good bet that I have a tube for this, but it not worth sending to me. Also, maybe it not the image intensifier tube but something else in the electronic.............Made in Russia--Red Star

Aug 02, 2011 | Night Owl Optics Cyclops Compact NOCC3...

1 Answer

Just purchased a new 3V CR123 battery for the prowler. The lights are working whenever i click ON or IR, however when looking through the lens nothing is visible. It's just all black. I removed the...


Jello, you meam that IR isn't emitting red light? If the IR isn't working then it has a bad IR luminator, broken wire, bad switch. Now the on/off switch get it power from battery to IR, it just one simple circuit. Also don't look at the IR light if it's on. Also don't point or look at bright lights with this NV devices, it will destroy the image intensifier tube. stewbison

May 30, 2011 | Bushnell Prowler 26-4050 Monocular

1 Answer

My husband has a Paramount moonlight night vision NV 100 that the lumint red light comes on but the night vision stopped working after only a few months it was bought a few years ago he put up and forgot...


Hello. The red light is the IR (infrarad luminator) this inhance the night vision capabilities of the scope, monocular. Do not look directlly into the IR tube, The Paramount Moonlight has gone to the land of the Red Star. The scope contract is up. it junk, to expensive to repair. stewbison

May 26, 2011 | Bushnell MOONLIGHT Night Vision -...

1 Answer

I got a Night Guardian night vision monocular scope. It doesn't work, but you can see the red pale light on its small reticule if switched on. I dont know why it doesnt work anymore, before it is fine....


These NV monoculars and this Guardian is made by ATN. Normally what happen is the image intensifier tube has gone back to Red Star country. In other words, it gone! The reason why the IR light up is it on a different circuit and has nothing to do with the internal electronic of this NV monocular.

All this IR light does is to provide invisiable light to inhance the image on image tube on very dark/clouded nights. Someone else using and NV devise can see IR light on your monocular and vise versa to you, you can see its IR light. stewbison

May 10, 2011 | Night Vision & Thermal Optics

1 Answer

I can't see any object in my night vision monoscope. The batteries are new.The indicator IR and ON are illuminated when switch to on.Please advice. Thank you very much. Respectfully yours, Remigio...


Hello, did you turn the Bushnell on. There two switches one for the on/off the other is for the IR and it say on as long as your finger pushs the button. Have you used during the daylight hours, looking a bright lights. If you have, the NV has gone south in one hurry.

If want come on even though the on/off switch working. If the NV devise is work there will be a green LED on the back indicating that the devise is on. stewbison

Feb 02, 2011 | Bushnell 4x50 Prowler Night Vision...

2 Answers

Yukon Ranger 5 x 42 night vision goggles just stopped working, I put in new batteries, but when I press the ON button the on light, which is red, just flashes maybe 10 times and then all goes black. ???


Hello, let do this. IR illuminator has a montary switch, that is when you push it comes on, and when you release it the IR goes off and it has a red LED to indicate the IR illuminator is being activated.

When you turn you binocular on there will be a green LED activated. This switch is DTSA---double throw sing activated. That is, one throw of the switch it turns on the binocular, the throw will turn off the binocular.

Also within the control panel there is timing circuit to keep the IR illumniator on for ten second the shuts off. Make sure you have the right switches etc. Let me know, then we can brain storm on this matter. stewbison

Jan 29, 2011 | Yukon 28041 Binocular

1 Answer

I need a I/R setup for these binos...do you have pr can you tell me where i can get one...thanks


Hello, contact Night Vision Optics they should be able to get you one. You can make your own by using an head light. Get an IR bulb, or change the lens to IR lens. If you want to high tech then get head light will IR LED's. If the white LED's are used don't use IR lens over this white LED's because of the light spectrum is different for the the LED's than incandescent light. They will have to be changed IR LED's..GB...stewbison

Jan 09, 2011 | Kalinka Baigish 12 Russian Night Vision...

1 Answer

The night vision light bulb broke. Where do the sell them and how would I install it?


Hello, what bulb are you reffering to here. Are you talking about the IR illuminator? GB....stewbison

Jan 01, 2011 | Famous Trails FT950 Monocular

1 Answer

Ir light will not com on


IR light is use to see in dark .so you have to replace the IR bulb.or check power supply line to the IR led.(bulb)
thanks.

Dec 06, 2010 | Aimshot NVG2MV Pro

Not finding what you are looking for?
Night Owl Optics Aero NOAR25 Monocular Logo

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Night Owl Optics Night Vision & Thermal Optics Experts

wadingriver
wadingriver

Level 3 Expert

2042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Ted Maxwell

Level 3 Expert

3515 Answers

Are you a Night Owl Optics Night Vision and Thermal Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...