Question about Trendware TEW-432BRP Wireless Router (TEW432BRP)

1 Answer

TEW-432BRP getting diconnected.

Once disconnected we dont know when we a can get the connection back.sometime need to reconfigure sometime not. that time wired connection also wont work. But at anypoint if I connected directly to my cable modemthis will work without any issue.Only One issue I seen is when I use htt://192.168.1.1 i can see two listing of my computer with differnnt ip and mac

Posted by on

  • 2 more comments 
  • Ranel Jun 18, 2008

    Every 3 days the trendnet router becomes disconnected from the internet. If I plug in directly from my DSL to my Computer I have internet access. I have to re-install the router to get internet access through the router functioning again.

  • Anonymous Aug 09, 2008

    I have same problem

  • rabisahu Aug 09, 2008

    It was working fine.. But one day I saw its not working and the Glowing LEDs are: WAN,LAN(1,2,3,4).

    LEDs which are not glowing: System,WLAN.



    Please help me if somebody has solution

  • Anonymous Nov 01, 2008

    mine does the same thing, but it connects for 1 min then is off for 30 seconds.
    sometimes it doesnt even communicate with the router


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

if you are still having trouble configuring your device, try to call supportrix and use supportcall as your promo code for 1 free technical support.

Posted on Jun 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont have installation driver


Hi there,
Router does not require driver to be used, all you have to do is to install the hardware and configure it.

1. You have to know your hardware version, so you can download your materials.
There are 5 version of your TEW-432BRP.



2. Click the link below, If you already know the version.

(Main).
(TEW-432BRP D1.2R/D1.3R)
(TEW-432BRP D1.OR/D1.1R)
(TEW-432BRP C1.xR)
(TEW-432BRP Bx.x)
(TEW-432BRP A1)

3. Download User Guide and Easy Go CD Files.
4. User Guide will help you to configure your router from start to end.

If problem persist just post and give a brief explanation on the problem.

Hopefully this helps
Thank you for posting.

Jul 09, 2011 | Trendware TEW-432BRP Wireless Router...

1 Answer

How properly to connect TRENDnet TEW-432BRP to laptop


To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Nov 26, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

How to connect tew-432 brp to MT800 modem for a wireless connection


you can connect your Ethernet cable from tew-432brp to MT800.

if serial ethernet cable not work you can check with cross cable of ehetrnet also.

Mar 30, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

I have trendnet wireless router model TEW-432BRP.i switched on the power,but the router didn't switch ON long time.when i switch ON the computer and logout the computer several time,then long time only its...


It is because the Power adapter is not connected properly. If this happens again. Disconnect the power adapter cable from the router and from the power socket. Then connect it back again. The router will come on. It could also be because of power surge which might have stopped the system for a while

Feb 03, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

Hi, I have a Trendnet TEW-432BRP wireless router and even if the speed link is 20 mbps (I tested it without the router in the midle) I get only 8 mbps having the router installed. Please help me solving...


You may need to do a firmware upgrade on your router to make the connection faster behind it....You can get the latest firmware from the manufacturers web site....

Dec 28, 2009 | Trendware TEW-432BRP Wireless Router...

1 Answer

I have to disconnect and reconnect my TEW-432BRP router


Hi! please try to download the firmware of your router the routers website and upgrade the routers firmware.possible is. the firmware is corrupted..

Jul 18, 2009 | Trendware TEW-452BRP Wireless Router...

1 Answer

I have a Pre-owned TEW-432BRP router, when i hook it up to comcast modem i cannot accsess internet. My PC says i have a connectivity problem. The button on front of router seems to do nothing, The lights...


There is a reset button on the back of the router. Push in with a paper clip, till the lights flash. This will reset it to the factory defaults.

Then shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line.


Here is the user guide:
http://downloads.trendnet.com/tew-432brp/manual/ug_tew-432brp.pdf

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.

May 09, 2009 | Trendware TEW-432BRP Wireless Router...

1 Answer

Trendnet router


i found out that since i have an older version of winxp 2000, i need to get a network adapter, to get this router going.

Mar 25, 2008 | Trendware TEW-432BRP Wireless Router...

Not finding what you are looking for?
Trendware TEW-432BRP Wireless Router (TEW432BRP) Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trendware Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

alex metro
alex metro

Level 3 Expert

331 Answers

Are you a Trendware Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...