Question about Office Equipment & Supplies

1 Answer

I want to reset the ink levels of my printer after refilling. Can you please help me with that? I also want to set my printing setting to "FINE" while printing photos but i can't. so the print quality is a bit noisy. i need ur help on this one to.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 634 Answers

Here you have not defined your printer name, so I am giving you the solution about two printers such as hp and canon:
Follow below steps for HP printer:

  1. Turn on your printer.
  2. Pop out cartridge.
  3. Take a piece of tape and cover contact #1.
  4. Put the cartridge back into the printer and the paper will print an alignment.
  5. Again which alignment you have to modify, take out the cartridge again and cover contact #2.

Posted on Oct 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I refill my mx300 and the alarm light will not go off and I can not us my printer


Hold down the stop/reset button for 10-15 seconds. this should allow you to print.
Refilling the cartridge will not re-set the ink level and the printer thinks it is a empty cartridge. Holding this button will disable the ink level monitor on the printer, so be careful not to run it dry or you can damage the printer.
If this information is Helpful please rate this response Thank You for supporting the FixYa Community
Regards GM

Apr 07, 2011 | Office Equipment & Supplies

2 Answers

Black ink cartridge is full, when printing no black showing


Reset waste ink counter

To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :

Start with printer on then run this software
Click Reset Main (main) to reset waste ink counter and then click Reset Platen button (additional)

Or

When you insert a refilled ink cartridge into your Pixma MP500 printer you should get a warning about the refilled cartridge. You should also be prompted, asking if you wish to disable ink level detecting. Agree to do so, and you won't get the warnings again because the ink levels won't be monitored by the printer.

Feb 22, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

We have a Dell 944 showing Error 1102 consult user guide...cannot find the user guide. We just replaced color ink cartridge with a re-processed one ordered online. Please advise...many thanks!.


Hi there
Dell Printer 944 error message 1102
Please unplug the printer from the wall. Now remove the power brick from the back of the printer for 60 seconds. Now plug everything back in. This will reset any error messages the printer has. Now open the printer with the power on and the cartridges should go to the center to be replaced. Take out both Dell Series 5 ink cartridges and make sure the tape is off the cartridges and insert both back in and make sure the seat properly and latch. Close the printer and it should print an alignment page. If you still get the error message

Why does my Dell ink cartridge level still show up as "low ink" after refilling them?
Dell ink cartridges have a sensor that reports the ink level as low once it reaches a certain level. The sensor can not
be reset. If you refill an ink cartridge that previously reported low ink, it may print fine, but the sensor will always
report low ink. Buying or replacing ink cartridges with new Dell cartridges will resolve the low ink message.

Dell discourages ink refills. Refilling ink may lead to print quality problems, and even eventual hardware problems.
This post is in no way a validation of refilling ink cartridges.

Why my printer is reporting “low ink" after using refilled/remanufactured ink cartridges?
Most ink cartridges have sensors that report the ink level. The “Low Ink” is usually the last sensor (fuse) before
running out of ink.

Since the sensors are fuses that open when the ink level drops, they cannot be reset. If you are using refill or
remanufactured ink cartridges, the best thing to do is to disable “ink alerts” on the printer’s software so you don’t keep
getting “low ink” messages.

To disable “Ink Alerts” on Dell inkjet printers:
1. Open the Dell printer software (All-In One Center, Tool Box, etc)
2. Go to Settings
3. Advanced
4. More Options
5. In the “Appearance Mode, window, check “Never display the Printing Status window” and “Display the low
ink alert only when the cartridges are almost empty.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 23, 2010 | Office Equipment & Supplies

1 Answer

Reset the ink memory level after replacing cartridge


To get your printer to recognize the new cartridge; go to start - printer and faxes -right click on printer - preferences (printing preferences) -settings -load factory settings. Print test page Ctrl+P

-Mustafa

Apr 30, 2009 | Dell 962 Photo All-In-One InkJet Printer

2 Answers

Lexmark X2550 ink cartridge refill


To get your printer to recognize the new cartridge; go to start - printer and faxes -right click on printer - preferences (printing preferences) -settings -load factory settings. Print test page Ctrl+P

-Mustafa

Mar 31, 2009 | Lexmark X2500 All-In-One Printer

2 Answers

How to reset ink level warning when refilling?


EASY!!!!: push the cancel button by 6 seconds, this deactivate the ink level sensor.

Dec 15, 2008 | Canon PIXMA MP470 All-in-One Printer

3 Answers

Reset Ink levels for canon mx310


How to reset Canon MX310 printer low ink signal

1. Power off the printer.

2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.

3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.

4. Release power button (the screen should now say 'Service Mode').

5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.

6. Press the power button once, (the orange light should go off).

7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.

8. Press the power button, and wait until printer has shut down.

9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.

10. The page counter is now reset! Enjoy.

Jul 29, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

Lexmark x5470 all in one printer-low ink level


To get your printer to recognize the new cartridge; go to start - printer and faxes -right click on printer - preferences (printing preferences) -settings -load factory settings. Print test page Ctrl+P

Mar 06, 2008 | Lexmark X3550 All-In-One Printer

10 Answers

Reset Ink levels for canon mx310


To Reset the Canon Cartridges Works 100%

Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Relase power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the inicator should be orange.
Press the power button to set data
To set data remove cartridges then replace.
leave for 20 or 30 secs
Press the power button again to shut down
Then press power button to power up.
The printer will feed one piece of paper through
then set language and counrty.
Then ink should be reset
Any problems contact me on charmed_halliwell@hotmail.co.uk

Jan 31, 2008 | Canon PIXMA MX310 All-In-One Printer

3 Answers

Reset Ink levels for canon mx310


I've heard that with canon there is a way around the ink-level chip monitoring on the cartridge by doing the following:
  1. Power off printer
  2. Hold RESUME button then press and hold POWER, the beeper will sound once.
  3. Hold POWER and release RESUME
  4. Press RESUME twice
  5. Release POWER button
  6. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
  7. Press POWER to set data

Jan 03, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...