Question about Casio Parts Cash Register PC Desktop

4 Answers

Error code E94 paper jam

I purchased model PCR -262 last May it worked for 3 month and I got an error code E94. There is no paper jam and I can't seem to figure out what to do. Please help me. Thanks, Nina

Posted by on

  • 1 more comment 
  • ninaso May 31, 2008

    It is made by Casio and It uses regular cash register paper. I'll try to blow out the dust with air blower and see if that'll help. Thank you, nina

  • Anonymous Sep 25, 2008

    AFTER A SALE HAS BEEN RUNG UP ON THE REGISTER THE E94 POPS UP IN THE WINDOW , AND THEN WILL NOT ALLOW YOU TO OPEN DRAWER OR ANY OTHER FUNCTION. SOMETIMES TURNING IT OFF , THEN BACK ON HELPS???

  • Ernie Dean
    Ernie Dean May 11, 2010

    Who is the PRC made by? If it's using thermal paper it could possibably be paper dust on the paper sensor.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I used WD-40 for clean the head and it useful try that
for e94

Posted on Sep 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I used compressed gas duster to clean the resgister and it worked. It is called Duster Destroyer and I got it at the Staples for $9.99

Posted on Jun 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

E94 errors - paper jam can be cleared by removing battery back-up and replacing them. The error appears to be retained in the memory.

Posted on Feb 08, 2009

I herd that some cash register fixer said that the printing mechnism has to be replaced try that

Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace the thermal roll to get it to print


Make sure you are using thermal paper which is 57mm wide.
Open the printer cover. Lift the paper holder lever on top of the printer. Remove the old tube from the last roll if it is still in the bottom of the printer. Drop the new roll into the roll holder in the bottom of the printer. Make sure the paper is coming from the bottom of the roll rather than off the top as it unwinds. Pull the paper out the front of the printer and close the paper holder lever down onto the paper. The shiny side of the paper should be facing you as it comes out of the printer. If not, the paper will feed out blank during printing. If you are replacing the journal roll, slip the end of the paper into the slit in the takeup spool (black reel) and wind over a couple of times before dropping into place. Replace the printer cover and make sure the receipt comes out of the cut out in the cover.
Good luck.

Jul 11, 2015 | Casio PCR-T2000 Cash Register

1 Answer

How can I fix my cash register with this E001error appearing always


You didn't finish the last sequence. Turn the key back to where you last had it (error will stop) then finish what you started in that mode before you turn the key.

Apr 05, 2015 | Casio PCR-T48S Cash Register

2 Answers

How can I clear a transaction and start over, when I keep getting an error message and beeping?


I would try to input an amount to see if it clears, if you still have manual that came with it there is a number that you can call for help

Mar 09, 2015 | Retail Supplies

2 Answers

Casio pcr-272 has stopped printing. paper is correct type and loaded correctly, ink is fine. only prints about 4 characters on the right side of the tape


give it a hard reset. so unplug and wait 30 seconds and try again if this doesn't work then it could be a software related error. unfortunately you would have to do more research

Jan 14, 2014 | Casio Parts Cash Register PC Desktop

1 Answer

I am not sure if I program clerk numbers yet, but I can not sign on my PCR-T470 I keep getting E008, and I tried 1 Clerk, 2 clerk, etc... and I get no where. Any suggestions?


That surgest you have no clerk numbers yet as the error E008 = Not signed on, working without a clerk number i have uploaded a manual for this on my host HERE i hope this helps

Oct 16, 2013 | Casio PCR-T470 Cash Register

1 Answer

Error code e94 till not working


It is a paper jam error remove the printer top and manually remove the paper jam. Pull out the receipt paper and manually remove any paper debris from the roller then reinsert receipt paper this should resolve your problem

Apr 19, 2013 | Retail Supplies

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

3,551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1534 Answers

tomferryman

Level 1 Expert

42 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...