Question about Belkin (F5D8231-4) Wireless Router (F5D82314)

1 Answer

I need my wep/wpa pass phrase - Belkin (F5D8231-4) Wireless Router (F5D82314)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 358 Answers

Just configure again your router.


Step 1 : Connect modem - Router - Computer ( Wired )
Step 2 : Open router setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left side under internet WAN click Connection Type
Step 4 : leave the Password Blank and click submit
Step 5 : Choose the connection type as dynamic and click next
Step 6 : Leave the Host name blank and click apply
Step 7 : On the left Under Internet WAN Click MAC Address
Step 8 : Click Clone and Click Apply changes
Step 9 : If the Internet status on the top right is connected
Step 10 : Then check if you have internet
Step 11 : if not Then unplug the Power Cable from the Modem And the Router
Step 12 : Plug the power Cord to the Modem
Step 13 : Wait till all the lights are on
Step 14 : Plug the power to the belkin
Step 15 : Check the color of the light in the belkin
Step 16 :If green then Check if you have internet
If not working then call belkin

======= WIRELESS SETTING UP A WIRELESS CONNECTION ================

Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works

Posted on Oct 31, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 742 Answers

SOURCE: I am trying to get wireless security

visit http://192.168.1.1 and configure your router's wifi security. user name is admin and no password

Posted on Sep 29, 2009

  • 38 Answers

SOURCE: i have a belkin wireless

You can find the wireless password also called wep key or wpa pass phrase through the set-up page of the router. If you don't know how to access it, follow the instruction in How to Access the Router's Setup Page (just click it.)

Posted on Nov 09, 2010

sweetlady105
  • 36 Answers

SOURCE: I need the WPA pass

If your router is Linksys/Cisco you may go to the link below

http://www.fixya.com/support/t6708085-forgoton_key_words

Posted on Dec 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I prevent my neighbor from using my wireless router?


If you do not have any wireless network security enabled on the router, your neighbor can see this SSID and connect to the network without authorization. While this is generally frowned upon as being unethical, it is technically not illegal as you have "made the network available" by failing to secure it. The easiest way to secure the network is through the use of a WEP key or a WPA pass-phrase. WEP keys are generally 5, 10, 13 or 26 randomly generated characters long. WPA pass-phrases are just that - a phrase such as "The sun is yellow". Either method will prevent unauthorized users from accessing your network. Only those individuals who possess the key or pass-phrase are granted access.

These options is located under the Wireless > Wireless Security tabs from within the router administration.After login you can change the password.

If you need any kind of technical assistance you can contact support cell at here

Jan 22, 2013 | Belkin Computers & Internet

1 Answer

I need a pass phrase or network key to be able to log on to my wireless internet connection for my laptop.


Hi,
Good day. If your looking for your looking for the pass phrase or network key for your router. You can try to do the following.
1. Check for a WEP key on the router itself. Usually it is on a sticker located under the router or at the back of it. 2. You can go to the router page using your internet explorer or mozilla > just type in 192.168.1.1 on your browser > it will ask for a username and password > username: leave it blank password: admin > then go to wireless setting > then it will show you your WEP or WPA or Wireless key > Dont be confuse the wep or wpa or pass phrase are all the same > then just type it on the space where its asking you to type in a pass phrase and that should work
3. If still you can locate it you can contact your internet service providers technical support department and they will be able to walk you through it

Hope this information will be helpful in resolving your concern. Have a great day and thanks for using fixya.

Jun 25, 2011 | Linksys Computers & Internet

2 Answers

What is wpa or wep


It is the security code that is setup on the router to prevent an unsecure network

Dec 08, 2010 | Belkin F5D7234-4 Router

2 Answers

I have a belkin wireless g plus mimo router and im trying to hook up my xbox 360 wireless and its asking for a wep key or wpa pass phrase how do i find that out?


You can find the wireless password also called wep key or wpa pass phrase through the set-up page of the router. If you don't know how to access it, follow the instruction in How to Access the Router's Setup Page (just click it.)

Nov 09, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

I'm trying to find my wep key or port number, I'm trying to connect my PS3 to the internet.


When you purchased the router, you should have run the "Wireless Networking Setup Wizard" to configure the router, to set an SSID, to set an encryption-level (use 'WPA' not 'WEP'), and to set a password (WPA-key or WEP-key or pass-phrase).

Use those values that you used when you configured your router to configure your PS3.

Sep 12, 2010 | D-Link DIR-615 Wireless Router

1 Answer

What is wpa pass phrase while setting wireless printer


WPA with a Pre-Shared Key (PSK), also known as personal. PSK is entered as a pass phrase between 8 to 63 alphanumeric characters in the ASCII format at both ends of the wireless connection. Although PSK accepts a minimum of eight characters, for proper security, it is a good idea to use ample length and should not use a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless client.

WPA pass phrase is a password for the wireless network to make it secured. You can obtain the WPA pass phrase when you access your router. Check the manual of your router for the address, username and password of your router. Go to wireless settings, you will see ther the SSID or Network Name, Network Key or the Pass Phrase and Authentication (WPA/WPA2/WEP). You can personalize the SSID,Network Key and Authentication. Remeber that for you to connect wirelessly the Authentication and Network Key on the router should match the Network Key and Authentication of the Printer or Computer.

Thanks for using Fixya,

Aug 06, 2010 | Computers & Internet

1 Answer

Not able to connect the sons Nitendo DSi to the internet. They are asking for the WEP Key but on my home hub there is only a WPA Key. BT have told me to connect to you to ask for support.


If your using WPA and your Nintendo DS only supports WEP Encryption theres no way you can connect it to the internet. WEP encryption is different from WPA.

WEP key uses hexadecimal - using characters 0-9, A-F or ASCII format. The ASCII format is easier to remember. The ASCII string is converted to HEX over the network.

Example of WEP key encryption are:

*64-bit hexadecimal keys are exactly 10 characters in length. (12345678FA is a valid string of 10 characters for 64-bit encryption.)
*128-bit hexadecimal keys are exactly 26 characters in length. (456FBCDF123400122225271730 is a valid string of 26 characters for 128-bit encryption.)
*64-bit ASCII keys are exactly 5 characters in length (DMODE is a valid string of 5 characters for 64-bit encryption.)
*128-bit ASCII keys are exactly 13 characters in length (2002HALOSWIN1 is a valid string of 13 characters for 128-bit encryption.)

WPA Key is entered as a pass phrase between 8 to 63 alphanumeric characters in the ASCII format at both ends of the wireless connection. Although PSK accepts a minimum of eight characters, for proper security, it is a good idea to use ample length and should not use a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless client.

To resolved the issue you have an option to change the WirelessSettings on your router to WEP instead of WPA since WEP is also a secured netwrok. however you need to keep in mind that if you change the encryption you need to configure all othere device connected to the router via WPA and change the settings to WEP.


Thanks for using Fixya

Aug 02, 2010 | Computers & Internet

1 Answer

Pass pharse


Log on to the router, go to wireless security.
I would choose WPA ( you choose the password)
WEP is much weaker, try not to use WEP ( It gives you a pass phrase/key)

Jul 22, 2010 | Linksys WRT160N Wireless Router

1 Answer

Wepkey/wpa


wep key and the wpa pass phrase is a wireless security option in the wireless option you got it to protect the wireless connection and you have the wireless router or modem or access point in that option you got it for the wireless security.

May 12, 2009 | 2wire 2700HG-B Router (2700HGB)

Not finding what you are looking for?
Belkin (F5D8231-4) Wireless Router (F5D82314) Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...