Question about Zebra TLP 2844-Z Thermal Label Printer

2 Answers

Tlp 2844 printing issues

My Zebra 2844 only prints when I push the feed button.
I can see the printing job in the print queue but only prints when I push the feed button
I tried different drivers, but could not get it to work properly
Any ideas?
Thanks

Posted by on

  • 1 more comment 
  • cameron_span Aug 18, 2008

    as above, tried solution which didin't work

  • srene4u Oct 22, 2008

    I have the same problem, the printer prints only after pushing the feed button. I reset more then one time by hold the feedbutton pressed during switch on, allways the same - it prints only after pressing the feed button.

  • Anonymous Apr 09, 2009

    Bah, guess no one has fixed this issue yet.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try powering off the printer, pressing the green button while powering back up then when u see it blink let go of the green button

Posted on Jun 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I tried this but it now doesn't automatically find the end-of-label. ??

Posted on Sep 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zebra TLP 2844 stuck intermittently. After pressing green button instead of one labels 2 or 3 labels came out. 2 blank and one printed. Please reply soon.


The feed button is probably just a bit sticky or registering multiple presses...it's likely not a major issue, and it likely has already gone back to normal operation.

Mar 09, 2011 | Zebra TLP 2844 Label Printer

1 Answer

Using tlp 2844-z


hold the green feed button down intill it flashes 4 time to default the printer and calibrate it

Apr 07, 2010 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

Zebra TLP 2844 printing landscape instead of portrait.


To change from "page mode" (protrait) to "line mode" (landscape) you need to complete the following steps.
1. turn the power off
2. hold the feed button down
3. turn power on, the feed button should blink, release the button.
4. when the feed button blinks green, press and hold until it turns red or amber. release the button.
5. turn the power off.
6. hold down the feed button and turn power on, the button should blink and release. it will now print a calibration page. 4 blanks followerd by 2 text pages, the last saying "Now in DUMP" press feed to exit. on the first print, the 4th line down will say either page mode or line mode.

Nov 04, 2009 | Zebra TLP 2844 Label Printer

1 Answer

Can t print labels they are not align zebra 2844


Press and hold the feed switch and when you see 4 flashes, release the button. The printer will calibrate and you should be able to see the labels align

Oct 26, 2009 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

I have TLP 2844 its printing very poor quality


Download zebra setup utility and use it to configure print quality.

Sep 23, 2009 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

Zebra Printer TLP 2844-Z - Will not print from application - prints SM 10 53 4D


Hold the feed button while turning on the printer. After a config label prints, turn the printer off and then on again, and try printing again.

Also, make sure the lid is closed far enough to engage the lid sensor. If the red light comes on again, press down a bit on the lid, hit the feed button and try to print again.

Oct 23, 2008 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

Zebra TLP 2844-Z Test page print within Win XP


This printer requires special software to print labels with. It uses a unique PCL language to work with. Thats why when you use these printers with Fedex or UPS software, it typically downloads forms first before working.

Zebra used to see a label designer program to work with it. You might want to check with them to see if they still carry it.

Jul 28, 2008 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

ZEBRA TLP 2844


plz try to use in another port(if available) or try with another cable

Jun 30, 2008 | Zebra TLP 2844-Z Thermal Label Printer

Not finding what you are looking for?
Zebra TLP 2844-Z Thermal Label Printer Logo

Related Topics:

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

pkwc

Level 2 Expert

254 Answers

lancer284

Level 1 Expert

35 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...