Question about LG DLE2514 Electric Dryer

1 Answer

I turned off my curcuit breaker today, and now my dryer will not power on.... the washer is fine though. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

The dryer requires ~220 volts AC to operate the heater which means a double breaker for the dryer. Push the breaker pair off, then back on, and try the dryer again. If nothing and you have access to a voltmeter (or know someone who does), measure the slanted blades at the socket for ~220 volts. If nothing after trying the above, then you may have a defective breaker (they are sold as a coupled pair). Hope this helps!

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 110-88752793 washer dryer. Tub filled up for the rinse cycle and then stopped. Tried turning on the dryer and that has no power either. Cycled the circuit breaker. Still nothing. Any ideas?


The circuit that supplies your washer and dryer may also have an in-line GFI outlet which may have tripped. Even though you have cycled the circuit breaker you would also have to reset the GFI outlet as well. Good luck.

Nov 26, 2016 | Kenmore Washing Machines

1 Answer

WHY DOES MY WASHER/DRYER COMBO NOT TURN ON?


Hello Friend, thank you for your post!

Based on the symptoms you are describing, it sounds like your Frigidaire laundry center is experiencing an issue with the power supply. In this regard, I would suggest contacting an authorized service technician that will be able to assist you in the diagnosis of your appliance. Best regards! - Z

May 17, 2014 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Were the curcuit breaker on the machine


There is not a circuit breaker on the machine. There are fuses on the power board though.

Oct 21, 2013 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

I have a bosch wta2000 dryer and it has stopped heating up. I have checked the cut off switch on the rear but it has not clicked out. Can you help suggest what is wrong and how easy is it to repair?


Check your breakers. Forcefully turn the curcuit OFF, and on again. If this solves the issue you may not have enough power to run the unit, and this requires a licensed electrician to resolve, as it is NOT just a larger breaker (fire hazard).
When the breaker trips, often the motor protion of the dryer still works.

Nov 13, 2010 | Dryers

1 Answer

My electric dryer stopped on me today...is there a curcuit breaker on it???


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Oct 01, 2010 | Maytag MDG6400 Atlantis Gas Dryer

1 Answer

Maytag Performa Dryer won't start.


I would suggest checking and probly replacing especially if you cant hear the timer motor.

Mar 28, 2009 | Zanussi TD4112W Electric Dryer

1 Answer

Kenmore Elite HE3 front load dryer no power


Yes. Remove the kickplate and check the continuity of the thermal fuse located on the blower housing.

Feb 23, 2009 | Kenmore Dryers

1 Answer

Turn washer dryer on ok, then close door then curcuit trips


check the wiring and make sure nothing metal is on the motor because your dryer has a short in it somewhere

Dec 23, 2008 | Hotpoint Ariston Aquarius WD420 Front Load...

2 Answers

Kenmore Oasis washer will not turn on


I have the same problem. I used the unit 2 days ago and no problems- just bragged about the unit yesterday and now today it will not turn on and it is no longer under warranty. I also checked to see if power to plug and it is fine. Any suggestions?

Aug 01, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

No power to control panel after power surge


Try turning the curcuit breaker off for a few minutes. Turn it back on and see if it resets itself. If not, the outage may have shorted out the main control panel.

Sep 30, 2007 | Maytag MDB7100AWB Dishwasher

Not finding what you are looking for?
LG DLE2514 Electric Dryer Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a LG Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...