FUNAI 29B-750 PL on display but no functions - Televison & Video

Make sure your VGA chord is connected to both TV and Computer. Right click on your desktop and go to screen resolutions. Click on Connect to a Projector and click the Duplicate icon.

From what I can tell the following link is for the same model you have but under the Symphonic brand.
http://www.symphonic.us/pdf/om/13TVCRMKII.pdf

Let me know if this helps.

This is a Funai product. Factory reset may be 1 2 3 4 DISPLAY. But Funai manuals I have refer to a "Service Remote" to enter service menu.

after connecting the projector just press function key and F4 . After pressing these key the projector connected automatically

Did you accidentally press the DISP button on the back of your camera? This manually turns the screen on and off to save batteries. Try pressing this button one more time to see if it turns the screen back on.

try www.retrevo.com/support/Funai-F20LCTE-TVs-manual/id/1080bh041/t/2/ hope this helps regards Jim

http://www.givemefile.net/smanuals/vcrs/funai/file/35083.html

Hi,

Most Philips/Magnavox VCR uses "PL" to indicate that the unit is on Parental Lock. Push and hold the power button on the remote control and wait for the unit to power up. This should be within 7 seconds.

Additionally, most (but not all) Philips/Magnavox VCRs are sub-contracted to Funai. Pls try here for Funai downloads of user's manual.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

I would contact them on this
http://www.funai-corp.com/support/contact.aspx


in the manual see page 34 for testing the remote
http://www.funai-corp.com/6pdf/om/CIWL3206.pdf