Question about Smart Pool Inc Dolphin Diagnostic Automatic Pool Cleaner Ne250

1 Answer

My Dolphion Diagnostic is about 4 years old. It's cycle time now is very brief-about 15 mins

Posted by on

  • rvarga1135 Oct 09, 2010

    can you guestimate how much for repair?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

Yikes, sounds like the unit has worn itself out. There is no easy fix for this. It is repairable but really it is going to cost as much as a new one to repair it, and won't work as well.

So sorry about that ;(

Tim

Posted on Oct 09, 2010

  • Tim Grayson
    Tim Grayson Oct 09, 2010

    Actually after doing some more research here you are correct, the repair is going to be less than buying a new one, I was thinking of another make of these diagnostic devices. Those Dolphins are spendy, but worth the money for sure. The repair is only going to be around $150 to get it back to running properly. I'm so sorry for the confusion the first time around there. Any local pool place that deals with Dolphins will be able to repair it or have it repaired for you.

    My apologies, glad you inquired again.

    Tim

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Perm Press cycle only runs for 2 min. and jumps to 14-15 min. every time.


find your manual and read it . sounds like the cycle has a 12 to 15 minute limit .

Feb 14, 2016 | Samsung DV330AE Dryer

1 Answer

Lawn mower


First ncheck for a dirty fuel filter, if its dirty enough it will starve the engine for fuel after a few minutes, then slowly let the fuel system refill as it sits.

Aug 27, 2009 | Garden

2 Answers

Dead battery on hot restarts


have the alternator and battery tested. one or both may need to be replaced

Jul 19, 2009 | 2000 Porsche Boxster

1 Answer

Dle2532 lg dryer, cooling light is always on


I'll take a stab that you use dryer softener sheets. These will deposit a coating on the two metal sensor bars (about 4 inches long, very near the lint filter inside the drum) which prevents the sensor from "seeing" that the clothes are still wet, so the dryer jumps to the cool down portion of the cycle. Clean the metal bars off and it should work again. (note: the bars are not in the cycle if you choose time dry instead of using the automatic cycles)

Apr 11, 2009 | LG DLE2532W Electric Dryer

1 Answer

Whirlpool gold dishwasher gets stuck at 53 minutes left for an hour


Try "resetting" the control board by running the diagnostic cycle. The cycle completes in 15 minutes. 
The details are in the service manual. The manual can be found hidden behind the tow plate (at the very bottom front of the washer).
The diagnostic cycle may tell you the problem. It also helps clear up some of the software gltiches. 
It is easy to run the diagnostic cycle.
Just the buttons in the following sequence. The sequence should be complete within 6 sec. 
heated dry -> Normal -> heated dry -> Normal
This will trigger diagnostic cycle of 19 intervals. Pay special attention to the intervals 18, 17, 9, 6, 4.
Interval 18 - displays your controller module number (should be letter 'd' followed by number 0 or 1 or 2 or something. Note that down for future reference.
Interval 17 displays 'software generation number' Note that down for future reference.
Then wait until you reach interval 9.  --- clean LED turns on - then an open or shorted thermister is detected.
-- Sanitized LED turns on - then the washer detected greater than 100 deg F temperature
Interval 7
-- Soaking/sensing LED should NOT come on (unless food soil is present).
Interval 4 -- Soaking/sensing LED should come on


Let the cycle complete and then try running the normal wash. Hopefully the possible glitches are cleared by now and you should have no problem. 
If this doesn't work, time to call the expert tech. 

Nov 08, 2008 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

LG DLEo332W electric dryer not drying full time


you have to change out the timer motor...
http://www.partselect.com/repair.aspx?appliance=dryer&part=dryer-wont-heat

Jun 08, 2008 | Dryers

1 Answer

Grinding Sound


Sounds like the brakes have become noisy, just like in an automobile if they glaze over they start to squeak. This really wont hurt the machine but if you dissasemble the machine (or pay a professional at the most 1.5 hr labor since your washer is the best design and fairly simple to repair) and clean the brakes (basket drive assy) and the drum (part of the tub support)

Oct 15, 2007 | Roper RAS8445KQ Top Load Washer

Not finding what you are looking for?
Smart Pool Inc Dolphin Diagnostic Automatic Pool Cleaner Ne250 Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smart Pool & Spa Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Robco Water
Robco Water

Level 2 Expert

239 Answers

Bill Boyd

Level 3 Expert

45552 Answers

Are you a Smart Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...