# I have an avent microwave steraliser type 02/2000 that takes 200ml/7oz water, i need to know how long to put it in an 800w microwave????

Posted by on

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
Goodluck!

Posted on Jan 02, 2017

Unfortunately, its programmed into the software. Ive never really seen a microwave thats given the operator the option to silence the alarm.

Posted on Oct 15, 2009

2 minutes for microwaves 1100-1850W
4 minutes 850-1000W
6 minutes 500-800W

Posted on Feb 08, 2011

×

my-video-file.mp4

×

## Related Questions:

### Calories in alchol

Beer 5% 375 ml 135 cals 18.8g 0.8g Light beer 2.2% 375 ml 94 cals 8.3g 0.4g Low carb beer 4.8% 375ml 110 cals 18g
White wine sweet 200ml glass 189 cals 18.3g 3.3g White wine dry 200ml glass 135 cals 18.3g 0g Red wine 200ml glass 133 cals 18.3g 1.3g Spirits 1 nip 30ml 60 cals 12g 0g Cider 200ml glass 75 cals 10g Water any 0 cals 0 mins 0g

Jun 06, 2014 | Measuring Tools & Sensors

### I have nuby steam microwave sterilizer but have lost the instructions and dont know the amount of water to put in or the amount of time to put in microwave

I have this as well. Put 200ml in for 5 min. keeps bottles sertilized for 3 hours, and if you keep them in the nuby sterilizer it will keep for 24 hours. hope this helps :)

Sep 13, 2011 | Luv N Care Nuby Touch Microwave Steam...

### Medication to be added to 200mls of water how do I calculate in a pint mmeasure

If you google volume conversions and find out that 1 gallon(UK) = 4.546 litres, then you immediately know that 8 pints = 22.73 measures of 200ml (multiply the number of litres by 5 [1000ml/200ml]).

Hence 1 pint = 2.84 measures of 200ml (divide 22.73 by 8). In other words a pint is just short of 3 measures of 200ml.

So whatever the dose for 200ml is, you need to multiply it by 2.84 to get the amount required in 1 pint.

The answer will be a little different if working in US units, but the method of working it out is the same.

Jul 21, 2011 | Office Equipment & Supplies

### Ive brought a avent streliser but threw thin instuctions away i dont know how long to strelise the baby bottles for in the microwave

I googled it, here's what I found from e-how. Hope works for you.

Avent Bottle Sterilizer Instructions

By Christine Lehman, eHow Contributor

jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Many parents like to sterilize their baby's bottles before use. Avent makes baby feeding equipment including bottles, nipples and breast pumps. They also make steam sterilizers that can be used to sterilize these items before use.

The Sterilizer

1. It is important to be familiar with the components of the Avent sterilizer before operating it. The base of the unit has a stem on which the racks holding the bottles (or other things to be sterilized) are placed. The bottom rack slides on the stem and lies near the bottom of the unit. It is made of mesh and will allow steam to rise through it while keeping the contents on the rack. Three other racks are available: two flat mesh racks (which look just like the bottom rack) and a rack with rings to hold bottles in place. Spacers are placed on the stem to separate the racks. If you wish to have more room between the racks, simply use more spacers. A lid fits over the entire unit.

Sterilizer Use

2. To use the sterilizer, the reservoir first needs to be filled with 90 milliliters of water. Using exactly this amount is important because if you use less your sterilizer may not work properly, and if you use more the cycle will take much longer than normal. There is a line in the reservoir marked "max" that should remain at or below the water line. You can use the milliliter marks on one of your Avent bottles to measure this volume exactly. Once the water is in the reservoir, assemble the baskets in whichever configuration suits your needs (for example, use only the mesh separators if you are sterilizing your breast pump and use the bottle rings to stand any bottles up that you are sterilizing) and load them into the unit. If you have small items to sterilize, also sterilize the pair of tongs that comes with the unit. Place the lid on the sterilizer. Plug the cord into the sterilizing unit, then into the wall. Turn the Avent sterilizer on and wait for it to cycle. Although the duration of the cycle will vary from load to load (small loads take longer to sterilize), this should take approximately 8 minutes.

After Sterilization

3. Wait 3 minutes once the cycle is over before opening the Avent sterilizer. Before then, the unit is extremely hot and the steam could burn your skin. In the meantime, unplug the unit and wash your hands. Remove the lid carefully and begin removing the items from the sterilizer, using the sterilized tongs if necessary. If you do not remove the lid immediately, the items in the sterilizer will remain sterile for up to 3 hours after the cycle is complete. Once the sterilizer is empty, pour the remaining water out of the reservoir.

Dec 18, 2010 | Microwave Ovens

### I have samsung microwave model MW830WA 120V 60HZ 800W IT IS DATED 2001. The fuse has been blown off last week. I want to know where the location of the fuse and what fuse to buy. Thank you, Phil

I know on my samsung it's right on top when you take off the outer cover. I also have an emerson and it's on the right side behind the control panel There is a white plastic cover over the fuse that just snaps apart.. I buy my fuses at radio shack. I know mine takes a 20 amp 250 volt.

Aug 12, 2010 | Samsung MW4699S Microwave Oven

### HOW TO DE SCALE THE Philips AVENT Digital Bottle

Mix one sachet of citric acid* (10g) with 200ml/7oz of water. Pour solution into the
empty warmer. DO NOT place a bottle, jar or cup into the warmer when de-scaling.
Close the lid of the warmer and programme the warmer to run with 310ml/11oz of
milk from frozen. After the warming cycle has ended, leave the solution to cool for
30 minutes before emptying the warmer and rinsing with tap water. Wipe the inside
and outside of the warmer with a damp cloth only.
OR:
Pour 100ml/3.5oz of vinegar mixed with 200ml/7oz of cold water into the warmer.
Allow liquid to stand in the unit until any limescale has dissolved. DO NOT place a
bottle, jar or cup into the warmer when de-scaling. DO NOT start the warming cycle.
Empty the unit and rinse thoroughly. Wipe the inside and outside of the warmer with
a damp cloth only.

Jan 30, 2010 | Avent Philips iQ Bottle Warmer without...

### How do I stop the beeping on a Hinari Microwave?

Unfortunately, its programmed into the software. Ive never really seen a microwave thats given the operator the option to silence the alarm.

Oct 14, 2009 | Microwave Ovens

### For how long do I leave the Avent bottle steriliser in microwave?

2 minutes for microwaves 1100-1850W
4 minutes 850-1000W
6 minutes 500-800W

Mar 17, 2009 | Microwave Ovens

## Open Questions:

#### Related Topics:

241 people viewed this question

Level 3 Expert

Level 3 Expert