Battery Charging Error - Disconnect Now error message
My W850i wont take a charge without an error message telling me to disconnect now. Quetsion is, is this a battery problem or a charger problem. I dont want to splash out on a new battery without being sure.
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has achieved Level 3.
Re: Battery Charging Error - Disconnect Now error message
Most new phones allow charging with the USB cable. With some phones, you also have the option to select whether you want to allow USB charging. If you're trying to charge with USB, make sure that your phone supports USB charging and that the option is switched on. please check ur settings..All the best
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. is your charger working properly?(It may be found faulty)
2. is the charging port OK?
If you say that your mobile shows charging in start, and after few minutes it gives an error "charging error stop charging". Then you should confirm first that its charger is original or not. If it is not a original charger, then you should change it...Good luck :p otherwise go to mobile repairing shop.
the battery may seem ok, but it's obviously discharging itself or not charging during riding.
Try this...charge the battery with a battery charger. disconnect the charger, and put a volt meter on the battery. Start the bike. Rev up to 2000 RPM. If the voltage is not HIGHER than it was before starting the bike, there's something wrong with the charging circuit. If it IS charging, turn the bike off, and disconnect the battery overnight. If the bike will not start the next day after reconnecting the battery, the battery needs to be replaced.
If the battery is NOT charging at 2000 RPM, the charging circuit is bad, and is likely what is draining the battery overnight.
Disconnect the negative terminal of the battery for 3 minutes, and try again. The error message shouldnt be on when you insert the radio code, it wont work. I sure hope that the battery inside the radio didnt die, because it wont be able to retain the code, or the station presets. You will be amazed at how much better the aftermarket radios are. If unable to bring it back to life, do not hesitate replacing it with a well known brand. Most come with inputs to play pendrives and Ipods.
SORRY TO TELL YOU WHEN DISCONNECT BATTERY ON VOLKSWAGONS.YOU MUST USE A MEMORY SAVER.IN CIGARETTE LIGHTER.TO KEEP COMPUTER MEMORY.IF YOU DONT.YOU HAVE TO GET A SPECIAL SCANNER TO REPROGRAM CAR LIKE THE DEALERSHIP.
i have the same situation. The workround I use is this... Method 1 Start the laptop with the mains disconnected Once Widows is running plug in the mains adaptor The battery will charge correctly, the laptop will run on the battery if the adaptor is unplugged
Second method if the battery is flat Start up with the battery removed Once windows has started - plug in the battery The battery will charge correctly
I have found no permanent solution so I use method 1 mostly
This player shows the "Do not disconnect" message when it is doing something critical such as transferring tracks or updating firmware, which could corrupt the player if disconnected part way through.
The player shows the "OK to disconnect" when it is idle. As the message says, it's ok to disconnect, as the player will not corrupt if disconnected when it is idle.
These messages mean that the player does not need the "Safe to remove" procedure.
It is ok to disconnect part way through charging. Also the player will condition the battery once it is fully charged, so it's ok to leave it charging.
Occassionally batteries can "memorise" when constantly disconnect and reconnected without fully charging and discharging. To help prevent this, fully discharge the player (leave on until dead) and fully charge and condition (leave charging for about 12 hours) every couple of weeks or so.