Question about Garden

1 Answer

I need wiring diagram for Belle 150 cement mixer 110v

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Small BLUE at top right hand corner, then the two rows of two...
top left is BLACK, top right is GREY, bottom left is BLUE from the power supply and bottom right is a short BROWN wire with a spur, which leaves a BLUE to connect to the spur. should be it :)

Posted on Oct 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO FIX PETROL MIXER STARTS THEN CUTS OUT


problem will be dirt or water in the carby that is blocking the main jet
overhaul the carby,
check for fuel flow to the carby

Jun 25, 2016 | Belle Group Minimix 150 Gas

1 Answer

A belle cement mixer,wont stay on when start button is pushed,changed switch ,still the same?


Sometimes the most simplest of fixes is verifying that you have voltage at your outlet and that you have voltage getting to the motor.

Check the motor's overload button; reset if necessary.
Take resistance readings:
  • start capacitor
  • run capacitor
  • and motor

If anyone of their specs are out of whack, that's the component that is defective and will need to be replaced.

Mar 24, 2015 | Masonry Tools

1 Answer

I need wiring layout for husky cement mixer?


Cement mixers aren't motorcycles. You could try asking Husquvarna for a diagram, they will definitely have one. It can't be that complicated thiough. They are usually diesel and so only have a very basic electrical system, Start and stop circuits and maybe a heater for the engine.

May 11, 2013 | Motorcycles

1 Answer

What is the voltage required to run rival hand mixer?


This plugs into a standard 120v household outlet, it's only 150 watts, running 10 of these is like one hair dryer. Most products say 110v, 115v in the USA.

The actual voltage is around 120v at the breaker panel and around 118v at the outlet.

But all products marked 110v, 115, 117, all work on a standard outlet.

Apr 14, 2013 | Rival 150 Watts MX555-W Hand Mixer

1 Answer

Iv'e got a belle cement mixer 150, i think the motor is on its way out, its around a 2007 model can you tell me if you can put new brushes in the motor if so how, or if i can have the motor reconditioned ?...


i have a belle 110v cement mixer just over a year old.Everytime i use it ,it switches itself off after mixing 2 barrows of concrete but it will run perfectly for hours when empty.(tryed this out on Monday)So therefore it only switches itself off when loaded.
Gets very hot quickly.

Any suggestions would be much appeciated.Brian

May 03, 2010 | Home Fencing

2 Answers

I need diagram of gearbox for Hobart d330 mixer


Parts manuals are available for viewing and free download at www.hobartservice.com

Dec 23, 2009 | Hobart D300 Stand Mixer

1 Answer

Workshop manual for belle minimix 150


http://www.islandhirecentre.co.uk/docs/spares/B10201.pdf

to get any engine drawings i would need the engine model from the side casing
hope this helps

Jul 30, 2009 | Hammering

1 Answer

Have new switch for belle 110v cement mixer


This should be pretty easy. you should have either two or four wires in the box and two or four hook ups on the switch. the wires in the box must stay aligned with the matching colors so if your switch has four connections but you only have two wires hook them up to the post opposite each other top to bottom. (they need to both be on the same side) if you have four wires but only two switch posts wire nut the two white (or blue) together and switch the black (or brown). The important thing to remember is the power needs to come in on go into the switch or breaker first.

let me know if this wasn't helpful

Mar 21, 2009 | Electrical Supplies

Not finding what you are looking for?
Garden Logo

Related Topics:

1,770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12104 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...