Question about Office Equipment & Supplies
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
YOU NEED TO REMOVE ALL DRIVERS FOR THE PRINTER IN ADD REMOVE PROGRAMS IN CONTROL PANEL. THEN REINSTALL THE DRIVERS AGAIN. THIS WILL CLEAR UP THE PROBLEM.IF YOU DON'T HAVE THE CD WITH DRIVERS. YOU CAN FIND THEM ONLINE.PLEASE DON'T FORGET TO RATE Y ANSEWER. THANKS HAVE A GREAT NIGHT.
Posted on Feb 10, 2009
I had the same Problem and checked the solution:
This is a Printer Maintenance request.
Ink Overflow -
you sould change the waste ink pads under the printer mechanic.
Posted on Feb 16, 2009
Unfortunately, the Russian software does not work on a Mac, and it crashes at launch when installed in WZ98 under Virtual PC. However, I found this on another site, and it worked immediately:
The sequence to reset the waste ink counter is as follows:
WASTE INK ROM RESET ONLY 870, 1270
1. Turn the printer off using the power button on the panel of the printer.
2. Disconnect the interface cable at the back of the printer.
3. Hold down the "LOAD/EJECT" and "CLEANING" buttons simultaneously.
4. Turn the printer on. Release all buttons as soon as paper out light flashes.
5. Quickly press (within 3 seconds while PAPER OUT light is flashing) the "CLEANING" button for 10 seconds.
6. Release the button and the printer will initialize.
7. Once initialization is complete, turn the printer off.
8. Reconnect the interface cable.
9. Turn the printer on
Works great, no muss...no fuss!
Posted on Apr 29, 2009
SOURCE: epson c48 printer
Reset your counter back to zero. But for some you must also check the waste bin status. Need disassembling this is to ensure ink will not overflow from your printer.
Reseting is only software base. Try this link
Post again if you cannot still got it.
Posted on May 31, 2009
You may not see a paper jam.
This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Feb 28, 2010
Tips for a great answer:
Nov 16, 2011 | Epson Office Equipment & Supplies
Jul 14, 2011 | Epson Stylus Multifunction Inkjet Printer/...
Nov 11, 2010 | Epson Stylus Multifunction Inkjet Printer/...
Sep 23, 2010 | Epson Stylus Multifunction Inkjet Printer/...
Mar 26, 2010 | Epson Stylus Multifunction Inkjet Printer/...
763 people viewed this question
Usually answered in minutes!