Question about Ecoquest Fresh Air Air Purifier
Unplug the machine and unscrew the phillips head screw on the back grill of the machine, that is just above the plug. There are depressions on the sides of the back grill that has a plastic tang that hold the back grill to the machine. Press the back grill inwards to allow the tangs to clear the sidee and the back grill should now be easily removed. Remove the two thumb screws on the top corners to remove the filter. Once the filter is removed, then you can remove the purification plate and remove the two screws that hold the RCI cell. The RCI cell and filter can be cleaned by vacumming out the dust and dirt.
The purification plate can be cleaned with a old toothbrush and a water and amonia solution. Scrub the metal grid with the toothbrush. Do both sides and then rinse with water, allow it to dry completely before reinstalling the plate. After every part is cleaned reassemble the purifier, and plug it in. Then press the reset reminder button on the front of the keypad to clear the "perform cleaning" message. This message will appear again after the purifier runs for 30 days to remind you to clean the purifier. Hope this helps you.
Posted on Oct 09, 2010
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 14, 2012 | Ecoquest Fresh Air Air Purifier
May 05, 2012 | Ecoquest Fresh Air Air Purifier
Jan 11, 2012 | Sharper Image Air Purifiers
Feb 08, 2011 | Ecoquest Fresh Air Air Purifier
Feb 02, 2011 | Ecoquest Fresh Air Air Purifier
Oct 01, 2009 | Ecoquest Fresh Air Air Purifier
Nov 10, 2008 | Ecoquest Fresh Air Living Air Purifier
Oct 15, 2007 | Ecoquest Fresh Air Living Air Purifier
471 people viewed this question
Usually answered in minutes!