Question about Sony Ericsson K800i Cellular Phone

1 Answer

My phone will not switch on. when i press the on button a red light flashes, by the camara button.

Posted by on

  • akash_cain Jun 01, 2008

    My sony ericsson k800i wont switch on but a red light flashes near the camera button everytime I try to switch the mobile on.

  • Presido Jun 03, 2008

    I was talking on my sony ericsson k800i phone whilst it went off. I tried to switch it on but couldn't come on. A flash red light reflect on the side ot the camera botton. What should be the recommended remedy to my problem. I need assistance.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem. I managed to solve it. Follow the link of youtube. It will tell youwhat to do. Follow it and it will work smoothly. http://youtube.com/watch?v=QgeveIa25HY
It does work!! You will be happy enjoying again your SE K800i.

Posted on Jun 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the pairing security code for xx3 plantronics


The following are detail instructions on how to Pair (sync) a Plantronics Bluetooth Headset to your Bluetooth Cell Phone:

1 - You need to go into the device you wish to pair it and turn the Bluetooth feature first.

2 - Then you need to place the headset in pairing mode so your phone will find it.

Find your model headset in the instructions below. Once the headset is in "Pairing" mode you will then need to follow the instructions in your cell phone or Bluetooth device's user guide on how to go it to your phone and search for the headset & pair it to a Bluetooth headset.

The passkey is 0000 (4 Zeros) except models M1000 and M1500 (see below for their number )

For the Plantronics M3000/M3500 (discontinued):

Pressing and holding down the volume up key and the talk button at the same time. Hold them in together until the indicator light on the headset starts flashing red then green.

For the Plantronics 510 Voyager:

510_small.jpg

Pressing and holding down the call control button and holding down the volume up at the same time until the indicator light on the headset starts flashing red then blue.

320_128.jpgexpl330_128_blue_pop.jpg340_small.jpg

Plantronics Explorer 320,330,340 & 350

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

dis655_128_blue_pop.jpg 665_small.jpg

Plantronics 655, 665

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.



discovery645_small.jpg

Plantronics Discovery 640, 645, 640e

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

plantronics-590a_small.jpg

Plantronics Pulsar 590/590e & 590A & a Bluetooth device:

Begin with the headset turned off. Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue.

pulsaradapter.jpgFor the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off. Press and hold the call control button. Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully.

pulsar_260_128.jpgPlantronics Pulsar 260

For the Plantronics Pulsar 260, Begin with pendant powered on.

Press and hold both the mute/play/pause button and the power on/off/pairing button simultaneously. When the
indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select "260 Plantronics." When prompted for passkey,
enter 0000.

m2500.gif
For the Plantronics M2500 (discontinued):

Start with the headset powered on. Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. When prompted for passkey, enter 0000.
m1000.jpg
For the Plantronics M1000 (discontinued):

Hit and hold the volume/mute switch in until the indication light starts blinking.

m1500.jpg
For the Plantronics M1500 & A500 adapter (discontinued): Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds. The light on the adapter will flash once after 3 seconds- continue to hold the power button for another-7 seconds until the light flashes red. If the pairing is successful, the headset will sound a tone and both the headset and adapter lights will turn off.

For both the Plantronics M1000/M1500 (discontinued): If you remove the battery cover from the headset and then remove the battery itself. On the Green PC board itself there will be a letter followed by 4 numbers. These 4 numbers are your personal PIN code.

You can also use the Plantronics Bluetooth Pairing Guide

Feb 05, 2011 | Cell Phones

1 Answer

Kx-dt333 phone rings, red light flashes but no ringer sounds ... ringoff is displayed on screen how do we switch to ring mode?


You can press the softkey under RingOff and the up arrow on the Navigator button, or just press the up arrow on the navigator button two times. The display will show the ringer volume level as you continue to press the up arrow.


Carl

Oct 26, 2010 | Panasonic KXDT333 Phone

1 Answer

I don't see why people love this camara... I usually have it on portrait mode because any other mode will make my pics blurry. When I have it on portrait mode when i take my pics it flashes twice (i dont...


In portrait mode the pre-flash helps prevent red-eye in your pictures. You can set the flash to do this in other modes. As far as improving your pictures, are you pressing the shutter button half-way and allowing the camera to lock in the focus (it will beep) before pressing the rest of the way or do you just press the button all the way every time hoping to get lucky?

Oct 12, 2010 | Nikon COOLPIX L20 Digital Camera

1 Answer

On my ge answering machine, the CL red light keeps flashing even though there is zero msg. so how do I clear this CL red light flashing


Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

Nov 02, 2009 | Uniden Cordless Phone

1 Answer

My nikon camara zoom & Flash not happing


Ensure the battery is ok and charges to its max, try with a newer battery.

Oct 14, 2009 | Nikon Coolpix 4100 Digital Camera

1 Answer

Phone won't open, red light flashing.


bring your phone to a local repair shop and have the ROM erased then have the phone software reinstalled.

Jul 09, 2009 | Sony Ericsson S500i Phone

1 Answer

GE 2-9439 Phone i need the manual to store numbers in one out of the 32 speed dial buttons!


1. Press the button you want to program
2. Press the Store button (red light will illuminate)
3. Enter the phone number
4. Press Store again (red light will flash)
5. Press the button you want to program (again)

Jun 03, 2009 | GE 29439GE2 Corded Phone

1 Answer

Speaker phone indicator will not go off


Liooks like you have the phone programmed to "Handsfree answerback" this will cause the handsfree light to flash continiously.
In this mode the phone will auto answer any internal call from another extension.... so watch out.
To switch this mode off press the program button above the displey & you be given th option to switch "Auto Answer off " I think it's the first option, try it.

Jan 07, 2009 | Inter-Tel Encore Phone

2 Answers

When someone calls the buttons flash but doesn't ring.


Your ringer has been switched off..to solve this press the menu button(mute in most of the sets)and press it until you see the option ringer press + to change it to off and then press menu again until you see the main screen...Thats all..
Let me know if it worked..

Oct 20, 2007 | GE 28111 Cordless Phone

Not finding what you are looking for?
Sony Ericsson K800i Cellular Phone Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Sandeep Shenoy

Level 2 Expert

187 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...