Question about Maytag Atlantis MAV8000
I have a Maytag Atlantis MAV8000 Washer, and when it's done with it's cycle, it will start it's spin cycle and drain the water off without spinning. When you take the wet load from the tub and turn the machine back on it will spin.
Check your exit hose spigot, it may be clogged. This is if your filter is all clean (ref manual). There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it (4 to 6 inches maximum) Of course some direct the hose into sink, fine. Snaking out your standpipe would be good too.
Rate me pl.....if helped. Click on 'thanks for trying' if not helped, your problem will be back for someone else to solve.
Posted on May 30, 2008
Tips for a great answer:
May 30, 2010 | Maytag Atlantis MAV6000 Top Load Washer
May 13, 2010 | Maytag Atlantis MAV8000
Oct 05, 2009 | Maytag Atlantis MAV6000 Top Load Washer
Jul 13, 2009 | Maytag Atlantis MAV6000 Top Load Washer
Jun 10, 2009 | Maytag Atlantis MAV6000 Top Load Washer
May 16, 2009 | Maytag Atlantis MAV8000
Aug 22, 2008 | Maytag Atlantis MAV6000 Top Load Washer
Aug 11, 2010 | Maytag Atlantis MAV8000
Dec 15, 2008 | Maytag Atlantis MAV8000
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: