Question about RCA L26WD26D 26 in. LCD TV
All lasma an lcd ts have boards that control vertical and horizontal output to their respective areas. They are connected to the screen by ribbon cables. If one of these boards fails all together, has a failed chip, a bad connection, or a bad ground somewhere it will result in a black line in the area of that board. A bad ribbon cable connection on the bottom will result in a vertical black bar though the screen. Many times reseating the connection will fix it, if the ribbon cable has been nicked there could be a severed connection. They an sometimes be fixed, but it is a pain. An yes I have done it, but the bar is gone. The same will happen if the chip that outputs to that area opens. The connectors are the first place to look paying close attention to the cable, they are extremely delicate so great care must be taken if you decide to tinker with em, the usually have lift locks that release them, but it is very easy to wreck em. There is a possibility that the screen is shot if the lines are very tiny, the black and white could just be adjustments, but the lines need to be taken care of first if they can,Good luck.
Posted on Dec 11, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 27, 2016 | Samsung PN50A450 50 in. Plasma HDTV
Jan 05, 2016 | Samsung Televison & Video
Jul 25, 2012 | LG 50PG20 50 in. Plasma HDTV
Jun 20, 2017 | Panasonic 50" 720p Flat-Panel Plasma HDTV
May 02, 2017 | Panasonic TH-50PX500U 50 in. Plasma...
May 31, 2008 | Panasonic TH-50PX60U 50 in. Plasma HDTV
Jan 22, 2008 | ViewSonic VPW425 42 in. Plasma HDTV
265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: