Question about Zenith E44W46LCD 44" Rear Projection HDTV-Ready Television

1 Answer

E44w46lcd zenith orange light

I cannot reset the light. i can get into the menu but the only button that gets a response is the enter button and that just seems to exit the menu. thanks for any help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If you are in the service menu (by holding down "Enter" on the TV and "Mute" on the remote simultaneously for about 5 seconds) - use the right arrow on the remote to reset the lamp time, and then hit the round button on the remote - the one between the arrows that has a "bulls eye" on it. That did it for me.

Posted on Jun 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lamp light will not turn off after installing a new one.


You will need to use the lamp reset procedure now that you have replaced the lamp.

This was copied/pasted from a previous fixya solution posted by expert DGJ89RS... This might or might not work for your Zenith telivision. I could not find any procedure on the Zenith website. They just advised to call a repair technician.

1- Press and hold the MENU button on the TV.
2- Press and hold the MENU button on your REMOTE (hold both these until the service menu pops up 5-10 secs max).
3 - Let go of the REMOTE button first, then release the button on the TV.
4- Press and hold the ENTER (or OK) button on the TV.
5- Press and hold the MUTE button on the REMOTE (hold both until the LAMP LIFE HOURS appears on the screen).
6- Let go of the REMOTE button first, then release the button on the TV. 7- To reset the lamp counter, press SELECT (or the button in the middle of the direction arrow buttons). Hit SELECT a second time to confirm clearing the lamp counter.

Jan 09, 2010 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Reseting the end of lamp life indicator


Hold down mute button on remote and enter on TV
at the same time for a few seconds, you should get
a screen promt asking if you want to reset the timer
for the lamp.

Mar 31, 2009 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Orange light re-set


Hold down the mute button on your remote and the
enter button on tv at the same time for a few seconds,
you should get a screen prompt asking if you want to
reset the lamp timer.

Mar 28, 2009 | Zenith E44W46LCD 44" Rear Projection...

3 Answers

Orange light on the front of the TV


Replaced bulb for zenith e44w46 lcd but the orange light is still on how can I reset the bulb timer on my own without throwing down another 85.00 for a repair guy to reset my T.V.

Jan 26, 2009 | Zenith E44W46LCD 44" Rear Projection...

4 Answers

E44W46LCD Lamp Timer Reset


To reset the lamp timer, hold the "enter" button on the tv and the "mute" button on the remote at the same time. Once the menu pops up, hit the right arrow on the remote and confirm the reset.


I would guess that's it's a little too late for this answer now, but for future reference... ;-)

Jan 09, 2009 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

How do I reset the timer


  1. While holding the ENTER on TV
  2. Hold the MUTE button on the REMOTE for the TV for at least FIVE seconds
  3. The Lamp hours reset menu should appear on TV screen
  4. Press select on remote (large button in the middle of four arrow buttons
  5. Press select button again, hours should reset to 0 and light will go out

Aug 21, 2008 | Zenith E44W46LCD 44" Rear Projection...

2 Answers

Z44SZ80/Z52SZ80 | DLP PROJECTION service codes


1. Press and hold the MENU button on the TV.
2. Press and hold the MENU button on the REMOTE
(Hold both until the service menu pops up)
3. Press and hold the ENTER button on the TV
4. Press and hold the MUTE button on the REMOTE
(Hold both until the LAMP LIFE HOURS appears on the screen)
5. To reset the lamp counter and turn off the orange light press select on the REMOTE.
6. Press Select again to con firm the operation.

Jul 09, 2008 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Reseting lamp light


If you are in the service menu (by holding down "Enter" on the TV and "Mute" on the remote simultaneously for about 5 seconds) - use the right arrow on the remote to reset the lamp time, and then hit the round button on the remote - the one between the arrows that has a "bulls eye" on it. That did it for me.

Jun 01, 2008 | Zenith E44W46LCD 44" Rear Projection...

7 Answers

Lamp Indicator is Orange


Press 'Enter' on the TV then press 'Mute' on the remote while holding 'Enter' down. A menu will pop up on the screen, allowing you to reset the light. It's also worth noting that you can get to the service menu by pressing 'Menu' on the remote and TV at the same time. There is an option for checking the number of hours on the lamp.

Apr 19, 2007 | Zenith E44W46LCD 44" Rear Projection...

Not finding what you are looking for?
Zenith E44W46LCD 44" Rear Projection HDTV-Ready Television Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Zenith Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...