Question about Fisher Price Ocean Wonders Aquarium

1 Answer

L6925 fisher price water fill - Fisher Price Ocean Wonders Aquarium

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Do you know how I can refill the L6925 fisher price aquarium? The water level has become half empty.

Posted on Nov 02, 2010

  • cute_giggler Nov 10, 2010

    You can't. You have to call the Fisher-price customer service and they will send you a voucher to replace it. They send you a shipping label through email and you send them the straps and battery cover. AS far as I know, at least that's what the rep said was that it was just a fisher-price voucher and if you don't want to actually get the aquarium again, you can use it on another FP product. Hope this helps

  • MacLellan Sep 18, 2012

    I called the service department today (Sept 18, 2012) and the rep told me there is no way top refill the water. However, I was only offered a $10 voucher and nothing more. No replacement was offered despite my asking.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer will partially fill with water and then starts to try and wash but just sits there and grinds and moves a little..


It sounds like it needs a seal and bearing kit installed.
Get a price on this first before you give go ahead for repairs.

Feb 08, 2013 | Fisher Paykel EcoSmart GWL15

1 Answer

Fisher & Paykel ecosmart GWL11 fill problem


Your diverter valve is cloged with lint and not fully closed and is letting wash water go down the drain.

Feb 22, 2012 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

My washer no longer produces cold water, only hot, except for the start of the cycle. The machine will tell me that it's not getting cold water. It doesn't matter whether I set the water temperature at...


It sounds like the fill hoses are inverted. Most of the Fisher washers only fill with cold water after the initial fill. So if the hose are inverted then it will only fill with hot. Beyond this I'm at a loss. Good luck

Apr 23, 2011 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

I have a fisher & paykel IW810 washing machine that will not fill the bowl with water. While filling, it is also pumping the water out, in the autowater level sensing mode. I have gone into the command...


hi, reading your posting it tells me that the machine will fill on traditional wash but on auto fill mode it pumps the water out at the same time it is filling. i"m pretty sure it is your diverter . on auto fill mode it fills a little bit then the pump comes on and recirculates your water by pumping the water from the bottom of the bowl to the top of the bowl over the clothes. on auto fill mode it also activates the diverter to pump the water back to the bowl. on your machine the diverter is stuck in the drain out position so when it trys to recirculate the water it drains out the water instead . the problem could be a faulty diverter, control module or a broken wire.hope this helps, please reply if you need more help. good luck.

May 17, 2010 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Help! My fisher paykel washing machine won't stop filling up!


If the water continues to fill even if unplugged the water valve is sticking and needs replaced. if removing power turns the water off the water level pressure switch is bad or there is something plugging the sensor tube somewhere.
Eric

Nov 22, 2009 | Washing Machines

1 Answer

Fisher & paykel fill up with water then


Yep it sounds like another electronics panel has failed.
We never had this much trouble in the old days with the old electric timer machines.

Oct 19, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher and Paykel washing machine fills and won't stop filling...


If the water stops when you shut if off at the wall you have a bad cold inlet valve, or the valve is getting a constant "open" command from the controller and thus the controller is faulty.

Jun 18, 2009 | Fisher and Paykel (IWL12)

2 Answers

Wont stop filling


If when you press pause while filling and it keeps filling then you have a faulty valve. If the filling stops then valve is ok.
If you filling keeps going until overfilling the machine which is what i understand is your problem, then most likely that you have a small pinhole in your pressure tube.

Apr 18, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Machine cant get any water.


Does the water fill to the correct level ?

Sep 09, 2007 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Fisher Price Ocean Wonders Aquarium Logo

Related Topics:

1,584 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Price Toys Experts

Bill Boyd

Level 3 Expert

44379 Answers

Bruce Mommaerts
Bruce Mommaerts

Level 2 Expert

86 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

135 Answers

Are you a Fisher Price Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...