Question about Sharp AR-5316 Advanced Digital Imager Copier

1 Answer

Code error h2 - Sharp AR-5316 Advanced Digital Imager Copier

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

Hi

Error code H2 means fusing unit temperature error. This error occurs due to a bad fuser temperature thermistor or due to fusing lamp. To resolve this error try and reset the unit by entering the service mode--


press # - INTERRUPT - C - INTERRUPT
then
14
start


If this resolves your issue then try restarting the printer and try the reset again. However, if reset is not helping you then you

Posted on Oct 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba 161 is error code H2


Error Code H2-00
Description: Thermistor open detection
Causes: The fusing thermistor is open.
www.electro-medical.blogspot.com

Dec 11, 2015 | Toshiba Office Equipment & Supplies

1 Answer

ASKO TL751 error messages ?


Asko dryers as model T760 or T780 indicate failure by error message (like "Overflow", "Sensor", "Thermistor", ...) while the model TL751 indicate failure by error code ("H1", "H2", ...)

Below you can see a list of error codes:

H1 error - Humidity sensor error
H2 error - Drying temperature sensor open/short error
H5 error - Heater overheated (ELECTRIC TYPE)
Heater disconnection check and H4/H6 error (ELECTRIC TYPE)
H3 Error - Flame Detector Open Defect (Gas Type)
H7 Error - Gas Valve Defect or Gas Blocked-off (Gas Type)
H8 Error - Igniter Defect or Flame Detector Short (Gas Type)


Dado

Mar 31, 2015 | Asko TL751 Electric Dryer

1 Answer

Bosch tankless water heater error h2


H2 wasnt an error code on those machines... could you check the display and ask again?

Feb 11, 2014 | Bosch & Tankless LP Hot Water Heater

1 Answer

I HAVE SHARP AL-1216,I DONT KNOW HOW TO REMOVE H2 ERROR CODE


H2 deals with the fixing unit.... You need to fix the problem before it can be rest. It may just be the fuser lamp is blown. You have to take it out and if it looks like a candy cane that is the problem. Good Luck

Jan 15, 2013 | Office Equipment & Supplies

1 Answer

MAIN CODE H2 SUB CODE OO CONTENT THERMISTOR


H2

Reset the error. (Enter simulation mode by pressing # * C *) display will go off. Press 1 4 Start. The machine will restart automatically. If the error continues, check the thermistor connection and the lamp connection as well. Replace if required. Replacing the PCB is the final step.

Nov 30, 2012 | Sharp AR-M205 Copier

1 Answer

Display error H2


Gwnerally in sharp you cancel H2 doing a reset through code 14. did you do it yet?

Dec 03, 2011 | Office Equipment & Supplies

1 Answer

Sharp 5320 H2 error code


Hi,
this is a fuser error message. You must fix the problem causing the fuser to post an error. Then clear the message.

Jun 19, 2009 | Sharp AR-5320 Black and White Copier

1 Answer

H2 00 problem


Try to reset the error code by pressing these buttons :
[#] [interupt] [c] [interupt] [1] [4] [start/copy]
If the error code still exist check the thermistor and it's connection and reset again.

May 21, 2009 | Sharp AR-275 Copier

3 Answers

Sharp AR-5127 H2-00 code reset


Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Feb 01, 2009 | Office Equipment & Supplies

2 Answers

Sharp AR-5127 H2-00 code reset


it is a heater code. The thermostat has blown and resetting the code could cause a fire, but it probably won't do anything, the part will need to be replaced

Jan 16, 2009 | Toshiba e-Studio162D Copier

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

257 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...