Question about NetGear WGR614 Wireless Router

1 Answer

I installed a beetel 450TC1 ADSL2 Router 2 days back. It works fine on my workstation PC. Using my laptop from another room (5 meters away), after 2-3 minutes usage, surfing stops, on checking says no signal. However on searching for wifi network, it quickly finds network, gives "Good" quality of signal and reconnects - and then again in 2-3 minutes disconnects

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,768 Answers

1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router
9. cell phones, cordless phones, digital TV's, can affect the data signal from a router. Also distance from the router can be a factor. If your router is in a basement place the router to a upper floor and center it in the room.
*****************************************************************

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beetel 450tc1


There are many things in the house that can interfere with wireless connectivity. Cordless phone are the most common. Some phone operate on the same frequency band as the wireless routers, and if there is a phone positioned between the router and the wireless device, it can cause problems.

Dec 07, 2013 | Computers & Internet

1 Answer

Beetel 450TC1


Yes. Simply disable NAT and DHCP service. You want it to be just a bridge, with wireless AP mode on.
Use one of the LAN Ethernet ports to connect it into your home LAN

Nov 28, 2013 | Computers & Internet

1 Answer

Wi-fi distance of beetel 450tc1 adsl2+router


Things That Affect Wireless Router Signals1. Many wireless routers are using the same wirelesschannel. Many manufacturers choose channel 6 as the default.2. Analogue video senders used to send audio and video toother TVs in the home.3. Microwave ovens emit interference in the 2.4GHz band.4. Wireless speakers and console controllers can causeinterference with the wireless router.5. Bluetooth devices, newer Bluetooth devices can jump todifferent frequencies if there is a connection problem.6. Power cables located near the wireless router can causedrop outs and speed reduction.7. Fish tanks will cause massive Wi-Fi shadow on the other sideof the tank from the wireless router. 8. Depending upon the location of large mirrors will reflectwireless signal away your computer.9. Building materials will block wireless signals such asplasterboards with metal foil, reinforced concrete walls and floors. Alsoobjects near the wireless router such as metal filing cabinets and otherelectrical appliances. 10. Blinking Christmas lights can reduce Wi-Fi performanceby 25% when it is close to the wireless router.

Mar 28, 2012 | NetGear WGR614 Wireless Router

1 Answer

I wanna block a website by beetel 450tc1 adsl2+router


what is the username and password for airtel wifi modem
450TC2 model i need to block some sites please help me

Jan 03, 2012 | Computers & Internet

1 Answer

Sir i have reliance broadband nd i want to connect with beetel(450tc1)adsl2+router.how can configure it?plz tel me sir. Thanks....


please explain better whats a reliance nd?
by the way you need to connect the dsl port to the phone line
wire a pc to a lan port and boot you will get an ip address then you can run a command prompt type ipconfig that will give you a the default gateway address thats the router address
type that address on the browser , that will take you to the router log in page insert name and password for router
if has a configuration wizard follow that for the PPPOE settings or dsl settings put your client ( username ) and password for the internet connection ( provided by internet provider reliance ) save the settings reboot both the router and PC an that should do it

Jul 29, 2010 | Computers & Internet

1 Answer

I have just set up a D-Link DSL-2640R Wireless-G ADSL2+Modem Router to support 1x desk top PC & 1 x Laptop (wireless). Both work fine when used in the same room as the router but the Laptop quickly...


Check that your router is set to a channel that does not have a lot of traffic on it. If you are in an area where there are a lot of wireless networks, this can be very important for proper operation. The other possibility I can think of is that the antenna is faulty or there is some other interference in your building. You might also check that your router does not have a low power wireless transmit mode, not many do, but if it does, it's always possible that it's turned on.

Mar 09, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

After configuring network TCP/IP automatic Dns server automatic or preferred and alternate dns as given by isp, setting router to mode router encaps..pppoa (second trial RFC1483) multiplex..llc virtual...


ftp://ftp.zyxel.com/

this the web site download the user manual from this site what ur configuration go thought it i think you get it and maybe the problem in the pppoa line its working or not just check it

Apr 02, 2009 | Zyxel Prestige 660HW Wireless Router...

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

1,779 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...