Question about Olympus Cameras

1 Answer

Please help me with this camera. it is new.. just a month old. And It is T100 . I took it out to take pics and then saw if they were proper.. then tried to switch off.. the lense would not go in, and I dont knw what happend I did not drop it ... or anything.. so what happened???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 11,967 Answers

Fixing a Lens Error on a Digital Camera
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HI, my sony cybershot T100 has been giving problems for a few months. Every time I take a picture, they come out blurry or moved and now even though the view in the back, images look out of focus and the ...


This is the sony support page for your camera, you may find the fix here:-

http://support.sony-europe.com/dime/digistill/cyber/cyber.aspx?site=odw_en_GB&m=DSC-T100

Sep 17, 2011 | Sony Cyber-shot DSC-T100 Digital Camera

1 Answer

Won't download on windows 7


you need an updated driver from the camera manufacturer. It may not be available yet as Win 7 is so new. This stuff happens everytime there is a new op system it took 12 months to get some drivers for vista.so dont hold your breath.

Buy a card reader and download your pics to the pc from the reader. Cheaper and possibly faster and more efficient than waiting for a driver release

Please rate my help ++++Thanks for using FIXYA


Nov 20, 2009 | Cameras

1 Answer

Missing pics on Memory card that I took today


Sorry. Unless you have a "undelete" program handy, you are out of luck. Even with the program, success is not guaranteed.

Nov 13, 2008 | Cameras

1 Answer

MEMORY FULL ?? CD310CE


if your cam is using a sd card, the card could be locked, theres a little switch on the side of the card try using that and see wat happens. its tiny on one of the sides.

Jul 01, 2008 | Cameras

1 Answer

Canon a560


Did you accidentally hit the "DISPLAY" button on the back of your camera? It manually turns the display on and off to save batteries.

Jun 21, 2008 | Canon PowerShot A620 Digital Camera

2 Answers

Shutter speed


keep the focus mode on AF-C for continous focusing

if you get the same promblem mail on - mworld22@gmail.com

Oct 10, 2007 | Nikon D40x Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

kakima

Level 3 Expert

102366 Answers

Willem.
Willem.

Level 2 Expert

359 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...