Question about Acer Aspire One PC Notebook

1 Answer

My battery pack not charging - Acer Aspire One PC Notebook

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 597 Answers

Hello,

If your battery pack is not charging, the problem can be from either the charger, the battery or the charging port on the laptop.

To test and repair if it is the charger, try to use the same charger on another laptop to see if it will work, if it does not, then the problem is from the charger. Try to have it open to see if the cords positive and negative wires are not having any kind of partial contact, if it is, then, you have to separate them and solder them where they are supposed to be. Or better still, replace the charger.

To test and repair if it is the battery, use the same battery in another laptop and try to charge it to see if it will hold a charge. If it does not, then you know it is the battery. The only solution to fix a battery is just for you to replace it.

To test the charging port, place a well tested okay battery in the laptop, get a well tested charger, then connect them to the laptop to see if it will work. If it does not, then it is obvious that it is the charging port that has a problem. To fix that, you have to get a replacement charging port, and dismantle the laptop, replace the charging port with a new one, then reassemble it back together.

Take care and good luck.

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I initially charge the batteries in the mophie?


Plug it in with a mini-D charge lead as used for Samsung cellphones.

mophie: Battery Phone Cases, External Battery Packs & More

www.mophie.com/
  1. Cached
  2. Similar
Shop mophie battery phone cases & universal external battery packs that extend the life of your mobile device. ... Charge your phone with advanced wireless ...iPhone 6s/6 · ‎iPhone 7 Plus · ‎Samsung Galaxy · ‎iPhone 7

mophie: Frequently Asked Questions (FAQ's) - mophie

www.mophie.com/frequent-questions
  1. Cached
  2. Similar
Visit mophie's FAQ's page for answers regarding juice pack battery cases, the space pack, warranty & return ... How do I wirelessly charge my juice pack case?

mophie: Product Manuals for Battery Cases & more

www.mophie.com/manuals
  1. Cached
  2. Similar
Visit mophie for digital product manuals for mophie's battery cases, storage cases, universal batteries, accessories and ... charge force case for iPhone 7 Plus. charge the batteries in the mophie Google Search

Jul 07, 2017 | Cell Phones

Tip

New Laptop Battery Use Tips


Taking Care Of Your New Battery Pack

Normally, a new battery pack comes in a very low charge condition and must be fully charged before use. Refer to the user manual of your portable electronic equipment for charging instructions.

A new laptop battery pack needs to be fully charged and fully discharged or “cycled” as much as five times to condition them into performing at full capacity.

Your equipment may report a fully charge condition in as short as 10 to 15 minutes when the new battery pack is being charged for the first time. This is a normal phenomenon especially for Nickel Cadmium (Ni-Cad) and Nickel Metal Hydride (Ni-MH) chemistries. When this happens, remove the Dell xps m1530 Battery pack and let it cool down for about fifteen minutes then repeat the charging procedure.

“Conditioning” (fully discharging and then fully charging) is necessary so as to maintain the optimum performance of a battery pack, and is recommended at least once a month particularly for Ni-Cad and Ni-MH batteries. Failure to do so could result in reduced charge capacity and can significantly shorten the battery pack’s useful life. Lithium Ion batteries do not require conditioning.

It is normal for a battery pack to get warm when charging and during use. However, if the dell Inspiron 2650 Battery pack gets excessive hot, there may be a problem with the portable electronic equipment’s charging circuit and should therefore be checked by a qualified technician.

Rechargeable batteries undergo self-discharging when left unused for long periods of time. This is normal particularly in the case of Ni-MH and Li-Ion chemistries. For best results, always store a battery pack fully charged. It should be removed from the equipment and kept in a cool, dry and clean place.

The amount of runtime a dell inspiron 8600 battery produces depends on the power requirements of components in your electronic equipment. This could be the hard drive setting, screen intensity and back-lighting on notebook computers, the liquid crystal display (LCD) screen and floodlight feature in a video camcorder, or the tri-mode communications network of a cellular phone. Always refer to your equipment’s user manual for power management settings.

on Apr 20, 2010 | Computers & Internet

1 Answer

Ndrive g800r battery charging


Li-ion battery packs in laptops have a circuit board that prevents overcharging. Unfortunately it also keeps count of the number of times the battery pack has been through a charge/discharge cycle and eventhough the batteries maybe still be good; IT keeps batteries from accepting a full charge and and that is why they will not keep a charge for as long as they did when new. Also if any battery in the pack goes bad it effects the whole pack because of the way they are assembled.

May 19, 2017 | Computers & Internet

1 Answer

18v 12 cordless trimmer/edger. Why won't it start?


the trimmers switch may be faulty.

CHARGING THE BATTERY PACK
Battery packs for this tool are shipped in a low charge condition
to prevent possible problems. Therefore, you should
charge them until the green LED on the front of the charger
comes on.
NOTE: Batteries will not reach full charge the first time they
are charged. Allow several cycles (operation followed by
recharging) for them to become fully charged.
CHARGING A COOL BATTERY PACK
See Figure 3.
If battery pack is within normal temperature range, the red
LED on charger will come on.
NOTE: If the charger does not charge the battery pack
under normal circumstances, return both the battery pack and
charger to your nearest Ryobi Authorized Service Center for
electrical check.
n Charge the battery pack only with the charger provided.
n Make sure the power supply is normal household
voltage, 120 volts, 60 Hz, AC only.
n Connect the charger to the power supply.
n Place the battery pack in the charger aligning raised rib
on the battery pack with the groove in the charger.
n Press down on the battery pack to be sure contacts on
the battery pack engage properly with contacts in the
charger.
n Normally the red LED on charger will come on. This
indicates the charger is in fast charging mode.
n Red LED should remain on for approximately 1 hour
then the green LED will come on. Green LED on
indicates battery pack is fully charged and charger is
in maintenance charge mode.
NOTE: The green LED will remain on until the
battery pack is removed from the charger or charger is
disconnected from the power supply.
n If both yellow and green LEDs come on, this indicates
a deeply discharged or defective battery pack.
Allow the battery pack to remain in the charger for 15
to 30 minutes. When the battery pack reaches normal
voltage range, the red LED should come on. If the
red LED does not come on after 30 minutes, this may
indicate a defective battery pack and should be
replaced.
n After normal usage, a minimum of 1 hour of charging time
is required to fully recharge battery pack.
n The battery pack will become slightly warm to the
touch while charging. This is normal and does not
indicate a problem.
n Do not place the charger and battery pack in an area of
extreme heat or cold. They will work best at normal room
temperature.
NOTE: The charger and battery pack should be placed
in a location where the temperature is more than 50°F
but less than 100°F.
n When batteries become fully charged, unplug the
charger from power supply and remove the battery
pack.
Source(s):http://toolboyworld.com/eBay/Ryobi_P110/...

Jan 23, 2016 | Ryobi Garden

1 Answer

EY3530NQMKW


I would suspect poor quality batteries in the battery pack or memory in the pack from recharging a partially charged pack instead of letting it work to flat condition. New batteries take hours to fully charge so if you just plugged in the charger for a short time before use then the battery pack may nit have been fully charged to start with.

Jul 23, 2013 | Panasonic EY3530NQMKW 15.6V Cordless Metal...

1 Answer

Bosch battery charger


You cannot over charge a battery pack as the charger stops at full charge. However by recharging a partially used battery pack you can develop a memory in the pack that the charger will not charge past

Jul 06, 2013 | Drills

1 Answer

Card indicates memory error what can be done to correct this problem and also save dictation already on there ?


Hi cazpell,

If you're encountering a memory error, it is often caused by the battery pack. Battery packs included with the DS-4000 are rechargeable battery packs. This problem is likely to happen on the DS-4000 when a NEW battery pack is being used. The battery pack out of the box does not hold enough charge to power up the recorder through its initial start-up procedure.

1. Please turn off the recorder.

2. Remove the battery pack and memory card for 20 seconds.

3. Install the memory card in the card slot.

4. Install new AAA batteries before you turn ON the DS-4000.

5. Your battery pack may also not be fully charged. All new battery packs must be fully charged from 2.5 to 3 hours before first time use.

6. For the first week to 10 days of use, it is recommended to recharge the battery pack as often as possible. This will exercise it and improve its charge-hold capacity.

Hope it helps.

Thank you for using FixYa.

Jun 21, 2011 | Olympus DS-4000 Digital Voice Recorder

2 Answers

Ryobi charger model # 140295003 has a red and yellow light. When charging red light is on what does the yellow light mean? Also how long should the battery be left in the charger?


Completely wrong. Quoting from the user's manual:

"The charge indicator light (LED), located on the charg- ing stand, will light up red and glow when the char- ger is properly connected to power supply. This light indicates the charger is operating properly. It will remain on until battery pack is removed from charging stand or charger is disconnected from power supply.

After normal usage, 3 hours or less of charging time is required to fully recharge battery pack.

If both red and orange LED indicators glow, the battery pack is deeply or completely discharged, and 6 hours or longer of charging time is required to fully recharge battery pack.

Note: If charger does not charge battery pack or orange LED continues to glow after more than 30 minutes of charging, return battery pack and charging assembly to your nearest Ryobi Authorized Service Center for electrical check."

So to summarize: red = charging. orange (yellow) = fully discharged battery. orange after 30 minutes - bad battery or bad charger.

Apr 23, 2011 | Garden

1 Answer

My father-in-laws gogo will be not used for several months while he's in florida. how should the battery be stored/charged while not in use?


Charge the batteries fully and remove the battery pack from the scooter. About once a month charge the battery pack. It shouldn't take long to charge since you are not using the scooter Don't overcharge when the light on the charger turns green turn it off and unplug it from the battery pack. This should keep the batteries fully charged and fresh when FIL gets back home. Hope this helps you

Oct 04, 2010 | Pride Mobility Products Go-Go Elite...

1 Answer

My battery on my compaq cq50 140 us wont cut on


sir/mam you`re battery pack is need to re-pack or change the Battery pack.if you want to safe and long life Battery Pack if you use the unit inside youre house use only a charger then remove the battery pack from unit do not use both supply,like a battery with charger.if baterry full only battery,if you charge the battery charge only..
This is a only a tips For Long Life Battery Pack and Unit..Thanks

Apr 29, 2009 | Compaq Presario Notebook

Not finding what you are looking for?
Acer Aspire One  PC Notebook Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

586 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...