Question about Canon PIXMA MP130 All-In-One InkJet Printer

2 Answers

Pixma mp 130 Message waste tank absorber is almost full. It wont print

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Master
  • 525 Answers

....To reset waste ink counter:
Press Menu-Scan-Copy-Scan to enter service menu.
Use arrow keys to scroll to "Service menu counter access".
Press OK.
Use arrow keys to scroll to "ABS-M DOT COUNT"
Press Copy.
Use arrow keys to reset count to zero.
Press OK.
Press Stop/Reset.

OR

turn on the printer press menu
press scan, copy, scan to enter service mode
use> to get to nvram
set ABS-M level to 0
Set ABS-P level to 0
Press stop to exit..........Done

I hope this help!

Posted on Jan 15, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

Take the printer to a qualified printer technician.
He/she will empty the waste-container,
and "reset" the electronics inside the printer,
to tell the printer that the waste-ink container has been emptied.

Posted on Oct 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon multipass pixma mp500 waste ink absorber full


printers are cheap buy a new one or look in a dumpster where university students live and have been throwing out junk cuz they are done with school.

Nov 23, 2013 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Pixma MP 130/110 Printer/Copier/Scanner waste ink absorber full, It neither prints nor copies


Cleaning the waste ink pads is easy.

Are your ink tanks empty and have you been using non Canon cartridges?

Regards,
Worldvet

Aug 01, 2008 | Canon Office Equipment & Supplies

1 Answer

I have a Canon Pixma MP 130/110 Printer. Machine is not printing. Have been through all the recommended cleaning/ maintenance procedures several times and fitted new ink cartridges all to no avail. Message...


Pixma IP3000
1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times!!!
6. turn off printer by button POWER.

Mar 06, 2011 | Canon PIXMA MP130 All-In-One InkJet...

2 Answers

Ink absorber full so printer wont print


yes, printer wont print and see screen message

Use this method below with your own risk!!

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

Use MPTOOL to reset waste ink absober full on pixma mp160.
Download your Mptool first http://www.ziddu.com/download/8524406/MPTool.rar.html

Download manual guide how to use Mptool on pixma mp160.
http://www.ziddu.com/download/8525856/mp160manualguide.pdf.html

Hope this can help......

Jul 15, 2010 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

My printer canon pixma ip2000 wont print there is a message on the monitor saying that my ink waste absorber is full


follow the link
http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

Jul 27, 2009 | Canon Office Equipment & Supplies

1 Answer

My Canon Pixma MP 170 tells methe waste ink absorber is full...


It is a shop repair since you have to use Canon diagnostics to reset the count and clear the error. The new part is around $10.00 only.

Jul 01, 2009 | Office Equipment & Supplies

4 Answers

Problem absorber full


Here and hope you find it useful. use the mp150 procedure

May 23, 2009 | Canon PIXMA MP160 All-In-One InkJet...

7 Answers

CANON PIXMA ERROR 5800


The waste absorber is full ,Replace the pads
then if you still get the error,you can reset it by following the directions below.
(reset without replacing pads can cause damage)

1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by pressing <--- or ---> then OK
3)SET ABS-M LEVEL TO 0
4)OK

Jan 20, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

Waste ink pad full error message


plz check the website http://www.fixyourownprinter.com/forums/inkjet/50418#1

Aug 04, 2008 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Canon mp 130 printer waste ink


hi
am AJAY FROM INDIA
off the printer and open upside cover,see 'the waste ink absorber if there any spunge pull that
and empty the waste ink from sponge or waste ink absorber
ok

again cloused the upside cover
ok

Jan 03, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2012 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...