Alcatel audience 42 landphone, how to configure for caller ID

To restore the caller ID function on your NEC Infrontia DX2ET 32 BM PABX system, you can follow these steps:

Check the configuration settings: Ensure that the caller ID feature is enabled in the system configuration settings. You may need to consult the manual or a professional to assist with this.

Check the phone lines: Make sure the phone lines are properly connected to the PABX system and are functioning properly.

Check the firmware: Make sure the firmware on your system is up to date and compatible with the caller ID feature. If not, you may need to upgrade the firmware.

Test the caller ID function: Try making a call from an outside line to the PABX system and see if the caller ID is displayed on the phone. If not, try using a different phone to see if the issue is with the phone itself.

If the above steps do not resolve the issue, it may be necessary to seek the assistance of a professional technician or a vendor who specializes in NEC Infrontia PABX systems. They will be able to diagnose and resolve the problem.

Go settings and turn off anything that looks like number recondition announcement or caller Id notification

Skype, 3CX, Cisco SPA3102

It sounds like the outbound Caller ID is not set up properly in form 22. You will need to insert *6 into the dial string. If this isn't set up, many carriers will reject the call as it doesn't see the correct outbound caller ID.

Sincerely,
Mark

Alcatel Audience 42 not support ID call.

If it is nokia you will go to settings - call - caller id the you will select yes. If not nokia is still the same procedure. Thanks

Were those other instruments purchased in India? The problem is that the U.S .uses a different"signal" to send caller ID than India.

check the settings on the PBX , Caller ID has to be set -up correctly on the PBX , ie T1 needs to be configured to pass the caller ID to the PBX and to the phone

no problem it's just a missed call indicator... press it and on the display screen it will say missed internal or external call, press the button adjacent to that and it will display the caller id of the missed call... again press the adjacent button and you will be presented with the option to delete the missed call... as soon as you have the orange light will stop flashing. On a 4019 the sequence is Orange button, 5 times up arrow until the identity of the missed caller is displayed ok, ok again to delete and then back arrow 4 times... hope this helps :-)