Question about Televison & Video

2 Answers

I need to change the Region code on my LG HB905SA HD Blue Ray DVD Player from region 4 to multi zone, I hope you can help.

Posted by on

  • andersonjace Oct 09, 2010

    Need to unlock the region code for LG Blueray DVD Player HB905SA from region 4 ti multi

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. You can try these three methods to make it region free---


METHOD 1

1. While there is no disk in the player switch it on and press 'Pause' button on the remote. Now enter '314159' on the remote and Code will appear on the display. Now enter '0' to make it region free. Press 'Pause' button again on the remote and power the player off and then back on and it will become region free.


METHOD 2

First of all without any disk in the player press 'setup' on remote control and move down to the 'lock' picture. Now press '0000000' and when congratulation message appears select 'Ok' button, switch off the player and then back on to make it region free.


METHOD 3

Without disk inside the player turn it on and open the disk tray. Now push '0' button thrice on the remote and push the pause button on the player. Now push '0 button on the remote and close the DVD tray and the player off and back on to make it region free.


Please accept the solution if the issue is resolved or post a comment for further assistance.

Thanks

Rylee

Posted on Oct 09, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

I have confirmed, there is no region unlock available for this model. It is coded at a hardware level meaning it is impossible to unlock the region on this device.

Thanks
Tim

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DVD region hack available?


no such thing exists

JVC HR-XVC1U region code - VideoHelp

www.videohelp.com/dvdhacks/jvc-hr-xvc1u/1143
  1. Cached
DVD Hacks > JVC HR-XVC1U region code hack. ... What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player ...

DVD Player and Blu-ray Player region codes - VideoHelp

www.videohelp.com/dvdhacks?dvdplayer...hits=25&listall...
  1. Cached
What are Blu-ray and DVD region codes, country codes, multi-region or zone ... 12382 DVD Hack hits, Showing 3276 to 3300 DVD Hacks ... JVC HR-XVC1U

JVC HR-XVC1U DVD Player/VCR Multi region hack ... - Fixya

www.fixya.com > ... > JVC > JVC HR-XVC1U DVD Player/VCR
  1. Cached
multi-region code hack is there a multi-region code hack for a Toshiba SD 370E dvd player? Can you help? I need the multi region code for my Toshiba DVD ...

JVC HR-XVC1U DVD Player/VCR Hack - Questions - Fixya

www.fixya.com > ... > JVC > JVC HR-XVC1U DVD Player/VCR
  1. Cached
will not play all regoins You need to hack the player to get all regions. There are a lot of web sites tthat carry the information you require. Some models dont hack ...

JVC HR-XVC1U - DVD Players - Retrevo

www.retrevo.com > Blu-ray / DVD Players > JVC Blu-ray / DVD Players
  1. Cached
JVC HR-XVC1U: No region hack for this player. Post region code/hack here. ... Harmony 880 w/ JVC HR-XVC1U VCR/DVD Combo- Help - Logitech Forums.

JVC HR-XVC1UC - DVD Players - Retrevo

www.retrevo.com > Blu-ray / DVD Players > JVC Blu-ray / DVD Players
  1. Cached
Learn more about the JVC HR-XVC1UC before you decide to buy. Download User ... www.videohelp.com. JVC HR-XVC1U: No region hack for this player.

May 03, 2016 | JVC HR-XVC1U DVD-VCR Combo

1 Answer

I am looking for multi zone crack for Pioneer BDC-TD04 (Sony Vaio laptop) Blu Ray drive, suggestions?


DVD REGION FREE & BLUE-RAY REGION FREE
To changethe Region code on your DVD player, open Control Panel - System - Hardware -Device manager, and click on DVD/CD ROM drives, then right click on the DVDdrive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have beenmade.
NOTE you can make only 4 changes and the player will lock permanently on the4th change.
If you want to play DVDs from any region you maybe able to upgrade the firmwareto make it region free BUT if you make a mistake or installed the wrongfirmware the player will be a piece of junk.
The best solution to make the player region free is to install a piece ofsoftware (Passkey for DVD) that allows you to play DVDs from any region andPasskey for Blu-ray that allows you to play Blu-rays from any region. There areseveral available on the Internet but my favourite is DVD-Region Free From: -
www.dvdfab.com/products,free.htm

Apr 09, 2012 | Sony VAIO C Series Notebook VPCCB17FXW

1 Answer

I cannot view some DVDs from other area than the one I bought the DVD player. Which is the area code to change or unlock the DVD area for LG 3D Blue Ray BX580?


HI,
Hi this player is multi region code free . There is no code region for this appliance. Please check other possibilities that cause your player malfunction.
Regards

Mar 11, 2011 | LG BX580 Blu-ray 3D Player

1 Answer

I OWENED LG BH 100 MULTI BLUE RAY PLAYER HAVING COMPITABILITY WITH HD DVD BLUE RAY & DVD MY PLAYER HAVE FOLLOWING SYSTEM INFORMATION PROVIDE BY COMPANY IN THE PLAYER MODEL : BH100-E SW VER :...


Go to this link:-
http://www.lg.com/us/support/product/support-product-profile.jsp?customerModelCode=BH100&matchedModelCode=1000002028&searchEngineModelCode=BH100&initialTab=documents&targetPage=support-product-profile#

Download the files,
burn onto disc using nero
place into bluray player
resolved

Jul 07, 2010 | LG BH100 Blu-Ray Disc Player

2 Answers

I need to dezone my dvd player panasonic XV N 670B (bought in a US shop, zone 1, but I live in Europe , zone 2)


Not possible, sorry.
Region code in Panasonic DVD player is not possible to break.
Thanks.

Aug 16, 2009 | Televison & Video

2 Answers

LG BD300 dvd palyer region free code


To set DVD Region to “0”, download file “6000.zip” (often also called “LG6000.zip”) from here:

http://www.multi-region.net/_media/6000.zip

Save the file and then unzip and extract it to your hard drive.

Now burn the subdirectory RMTM0000 and its contents (not the text file) onto a CD-ROM (ISO format, “closed” CD-ROM).

Insert CD-ROM into the LG BD 370 P player, and when the Region Management System screen is displayed, set the Region Code to “0” using your remote. Once done, press “PAUSE” on you remote to save, and you’re done!

Mar 03, 2009 | LG Super Blu BH200 Blu-ray and HD-DVD...

1 Answer

Regional code


open tray
Press PAUSE
enter 0000
The region code set page should appear.
Set code. 0 for multi region
Press PAUSE.
OR

Make sure your TV is on and the DVD player is active on it
Unplug the DVD player
plug it back in
wait for text "nodisc" to appear on the DVD display
Use remote control to open tray (tray must stay open)
Use remote control to Press "Pause" (you won't see anything)
On the Remote control number pad enter the number "0000" (4 zeros)
The region code setup window will appear on your TV
on the remote control number pad enter number "0" (zero)to set multi region
Use remote control to Press "Pause" again
close tray

Jun 06, 2008 | LGDVB418 DVD Player

2 Answers

Unlock region codes


i fund this by dargan and it worked for me "Def" Camino Real 3, Panama:
icon_minipost.gifRegion code hack posted by dargan, August 23 2008:
Same hack for DVD283 worked for DVD-277

<clipped from other post>
Region code hack posted by mhardial, January 25 2008:
DVD Regional Codes
Code Location
**1** USA (incl. territories), Canada
2 Europe (Germany), Japan, South Africa
3 Southeast Asia
4 Latin America, Australia, New Zealand
5 Russia, rest of Asia and Africa
6 China
0, 255, 9 MULTI REGION


Region Code Change


NOTE: Make sure you DO NOT have a disk in the tray while performing the region code procedure

DVD Players


New DVD283
1. Open DVD Tray
2. Press the “Menu” button
3. Press 8888
4. Press the “Display” button
5. Region Code Number shows up. Use the numeric keypad to select your region code number (0 – 6).
6. Press the “Setup” button to exit.

Mar 07, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,080 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...