Question about Uniden BC92XLT Handheld Scanner

1 Answer

Please tell me how to program in my county scanner frequency numbers .

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

To enter a known frequency into your BC92XLT:

- Power the scanner ON
- Press the HOLD key
- Enter the number of the channel that you wish to program (1 through 200)
- Press the FUNC and PGM keys
- Enter the frequency, including decimal point (e.g., 155.455)
- Press E to enter the frequency into the scanner's memory.

More detailed programming instructions can be found in the factory user's manual which you can download and print, at no cost, here:

http://www.uniden.com/pdf/BC92XLTom.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B.
Listening in since the 60's

Posted on Oct 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to know if there is away I can print out the frequencies & channels for Monterey, Calif Thank You


Yes, go for it :>)

  • Monterey County, California (CA) Scanner Frequencies and ... www.radioreference.com > US > California Scanner Frequencies and Radio Frequency Reference for Monterey County, ... Monterey County California . ... Monterey Regional Waste Management District : FM :
  • N6SPD : MONTEREY PENINSULA POLICE FREQUENCIES n6spd.com/freq/mcfreq.htm 155 rows · CHANNEL # FREQUENCY: TONE: SHERIFF: North Dispatch: 1: 159.090: ...
    • AGENCY TYPE CHANNEL # FREQUENCY SHERIFF North Dispatch 1 159.090 CAL FIRE North Dispatch Command 1 152.720
  • Monterey County Scanner Frequencies (CA) - Intercept interceptradio.com/slocal.php?disp=1&country=US&state=CA&county=... 39 rows · Home of the world's largest radio/scanner frequency database ...
    • Freq PL/M City Call 51.76 114.8 Monterey WE6R 51.82 136.5 San Ardo WR6VHF
  • Monterey Park Scanner Frequencies (Los Angeles County CA) www.interceptradio.com/slocal.php?disp=1&country=US&state=CA&county... Scanner Frequencies for Monterey Park Los Angeles county CA US. ... Los Angeles County Scanner Frequencies (CA) ... Channel Notes;
  • View and Compare Your Scanner Options ' Police Scanners www.policescanners.net/scanners-ca-monterey View and Compare Your Scanner ... About Us; View and Compare Your Scanner Options Monterey County, California Fire Police ... Fire and EMS channels in ...
  • California: Monterey - Radio Scanner Frequencies www.scannerfrequencies.com/radio/california/monterey/page/2 Scanner Frequencies ... USA CA Monterey. Articles Contact Submit. Follow @ScannerFreqs. California: Monterey. Frequency: CallSign: DBA/Licensee: City:
  • California Public Safety Frequencies - Bay-Net www.bay-net.org/frequency_calif.html 866.2000 - Channels 20 & 21 - Northern California. ... to air tactical frequencies. In southern California FIRESCOPE area ... California Public Safety Frequency ...
  • Monterey Park, California - Scanner Frequencies - Phone ... www.cityfreq.com/ca/montereypark Scanner frequencies, phone numbers, ... Monterey Park, California Scanner Frequencies. Public Safety. AHMC MONTEREY PARK HOSPITAL (CARMEN ...
  • FCC Licenses and Scanner Frequencies for Monterey County ... www.radioreference.com > US > California > Monterey (County) FCC Licenses and Scanner Frequency Listing for Monterey County, California ... US > California > Monterey (County) County Home;
  • Monterey County Frequencies - Scanning California www.scancal.org/old/monterey/county.html Monterey County Napa County ... Scanning Central & Northern California Frequencies Monterey County Last Updated: ... Channel 2 - Secondary
  • Feb 04, 2016 | Radio Communications

    1 Answer

    My scanner no longer scans the local police and sheriff frequencies. It will only scan the next county sheriff frequencies. It was originally programmed to scan Omaha police and Douglas Co. sheriff.


    It's possible that your county services have switched to a trunking system, leaving you with nothing but "dead" frequencies. To check the frequencies and systems that are currently in use in your area, visit:

    www.RadioReference.com

    Bill B.
    Listening in since the 60's

    May 29, 2011 | Radio Shack Pro-97 Handheld Scanner

    1 Answer

    I want my county on my scanner but it jumps to other counties how can i stop it from doing that


    Make sure that you have the proper frequencies programmed into the scanner. For a comprehensive database of active frequencies in your area, visit:

    www.RadioReference.com

    If adjacent counties are using the same frequencies as your local services, there's no way to filter them out. If signals from the other counties are weaker than yours, adjusting the squelch might help, but that will also lower the scanner's sensitivity to the signals that you want.

    Bill B
    Listening in since the 60's

    Oct 04, 2010 | Radio Shack Pro-84 Handheld Scanner

    1 Answer

    I'm having problems programming radio frequencies on my scanner.


    You didn't mention the make or model of your scanner, so I can't provide a response specific to your unit, but the trailing zero is meaningless, so there's no reason to enter it. Some bands on some scanners will only accept three decimal digits, but the scanner should round off your entry and still receive the intended frequency.

    Bill B

    May 02, 2010 | Radio Communications

    1 Answer

    Sorry if i am posting this more than once,,i am trying to figure this out,,can anyone please tell me where to find free police and fire frequencys at?


    Hi again :o)
    Log on to RadioReference.com, At the top you will see Database. Click on that and a map of the U.S will show up. Click on a state, and a list of county's will show up. Click on the county and you will see the frequencies.
    Here also, is a website that has some links for police and fire frequencies for different states.

    http://www.police-scanner.info/police-scanner-frequencies.htm

    There are probably other sites as well.
    Hope this helps... maybe I should get me one of those!

    Sep 25, 2009 | Uniden BCT8 Base Scanner

    1 Answer

    Having major issues with programming my bearcat bc60xlt-1


    You'll need to program the radio frequencies into your scanner before it will scan . For a list of frequencies in Anoka County CLICK HERE .
    For specific programing instructions for your UNIDEN refer to your owner's manual. They will give you a step by step instruction on how to program the frequencies into your scanner memory (If you need a manual, CLICK HERE
    ...be sure to select the scanner option on their pull-down menu.
    THEN when you have the radio frequencies stored into your scanner, you'll be able to press scan and away you go.
    Be sure to adjust the squelch just high enough to eliminate the static...turn the squelch counterclockwise until you hear loud static, then turn Clockwise just enough to silence static...
    Let us know if you still have trouble.

    Jul 20, 2009 | Uniden BC60XLT-1 Handheld Scanner

    1 Answer

    Cannot for the life of me figure out how to program this!


    You need to obtain local frequency numbers for your area.
    google search, "radio frequencies" and you county, city name...it'll give you lists of frequencies to enter into your scanner..
    Your user manual should show you the step by step with which buttons to push... are you having difficulty entering the frequency numbers?
    k

    Jul 06, 2009 | Uniden BC60XLT Handheld Scanner

    2 Answers

    Free scanner frequencies for arkansas


    here you go
    http://www.radioreference.com/apps/db/?ctid=165

    Jul 03, 2009 | Radio Shack Radio Communications

    1 Answer

    I'm trying to program my scanner


    go to radioreference.com and click database, then click Ilinois,then your county and you will get a list of everything in your county

    Feb 11, 2009 | Radio Shack Pro-2096 Base Scanner

    Not finding what you are looking for?
    Uniden BC92XLT Handheld Scanner Logo

    Related Topics:

    78 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Uniden Radio Communications Experts

    Jason

    Level 2 Expert

    211 Answers

    John
    John

    Level 2 Expert

    509 Answers

    AnyMHz.com
    AnyMHz.com

    Level 2 Expert

    500 Answers

    Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...