Question about RIM BlackBerry 7290

1 Answer

No message services configured after wipe and reset

I had to wipe and reset (using the 10 password method). I was able to synch with entourage calendar and contacts and can receive email but cannot reply/forward or compose. I get "no message services configured. You will only be able to Save Draft."

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,224 Answers

Sounds like you need to set up the WaP settings this and address they use so that email and texting can be used
on your phone and most black berry BB use the same wap
for your BB you set the WaP threw security with the tech of your service provider they will give you info on that to set it up

now for the BB there is a setting if you already have the services it states in service provider if you did not set your service code by registering it with in 48 hours even after a wipe you will need to have a new code installed
after 48 hours of a wipe your services are whats the word scrapped and then you have to set services back up threw service provider this will bring back the tzones and browsers
this info is an add info install
in your BB there is a registration button once you click this after your services you know works will register back all info and place appropriate icons back on the face desktop

i hope this helped you
i went threw this not just 2 weeks ago when i upgraded my BB so im fresh on the info im giving you

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intex user manual


You can configure it with below method. You can also configure it with below method.
Connect your routericon1.png to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Oct 28, 2013 | Computers & Internet

1 Answer

I stupidly changed a setting on my router configuration using the ip address in the address bar on my internet page , now i cant access it and change it back , i was trying to change my NAT type to open ,...


Press and hold RESET button for 10 seconds it is in the back side of router. Then all settings defaults. Then need to configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Sep 09, 2011 | D-Link DIR-615 Wireless Router

1 Answer

Wlan/wps isnt working how do i fix it


You need to RESET then need to reconfigure.
Press and hold RESET button for 10 seconds it is in the back side of router then configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method.
But after RESET you need to reconfigure it with below method.
Click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Aug 10, 2011 | Computers & Internet

1 Answer

I dont know how to install intex it-g100rd router


You can configure it with below method. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Jul 14, 2011 | Computers & Internet

1 Answer

I have to D-link xtreme N DIR-655, how can i use the other router as an access point?


You need to configure router with below method. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Connect Internet cable to router's WAN port. Let me know if you need further assistance. Thanks for using FixYa.

Jun 19, 2011 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

My HW2R1 router keeps disconnecting from the internet. It is receiving a wireless signal from my cable modem (it also has wireless broadcaster). When it disconnects, I check the modem, and it still has a...


You need to reset router to defaults. Also change wireless channel type to 3 or 6 or 11 then check.You can configure channel type with below method .

Press RESET button for 10 seconds it is in the back side of router then all settings defaults. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

May 15, 2011 | Hawking HW2R1 Dual Radio Smart Repeater

1 Answer

All connections made properly..checked all the wires..none damaged. the wireless connection on the router will not light up.


For that you need to reset router then configure again also make sure wireless is enabled. For RESET router press RESET button for 10 seconds then it reset all settings to defaults. then follow below. You need to configure your router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then set WAN settings as internet service provider settings enable DHCP. .Click on wireless and enabled it. Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 16, 2011 | Belkin F5D8236-4 Router

2 Answers

How do i reset the login and password?


You can reset it with pressing RESET button for 10 seconds it is in the back side of router. Then all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Let me know if you need further assistance. Thanks for using FixYa.

Jan 15, 2011 | NetGear WGR614 Router

4 Answers

Entourage Error 3259


This may be due to the means of authentication being used -- by the STMP server you are sending to and/or the authentication options selected in your Entourage setup. Mail servers commonly establish restrictions based on authentication to restrict who can send mail through them as a means of preventing spam.

Cable companies for example, and possibly your campus network, often restrict the sending of Mail to those computers that have a local connection to their network based on the IP address they are using -- i.e. where you plugged in or which wireless adapter you are connected to. Alternatively, many others require your mail client to present your user name and password to authenticate... or possibly to authenticate only in those cases when you are not connected locally.

So... to get an iron clad answer, you need to find out from the Mail server administrators what type of authentication is required. This information is often listed on "help" web pages describing how to set up your mail client... or call them if you can. Alternatively, check your Entourage setup to see how it is contacting the server for outgoing mail. Try changing the authentication method to use Password authentication if it is not already. Ultimately, the mail administrator for your Mail server is likely your best help resource.

Hope this helps.

Oct 13, 2009 | Microsoft Entourage For Mac for Mac

2 Answers

Entourage Hot sync failure with Palm (error = #-1)


1. Right click Red/Blue synch icon in lower right corner
2. Select custom
3. See how many items are in two way synch

Sep 13, 2007 | Microsoft Entourage For Mac for Mac

Not finding what you are looking for?
RIM BlackBerry 7290 Logo

1,372 people viewed this question

Ask a Question

Usually answered in minutes!

Top RIM Computers & Internet Experts

Andrew Wright

Level 2 Expert

117 Answers

Trisha
Trisha

Level 2 Expert

173 Answers

asber
asber

Level 3 Expert

291 Answers

Are you a RIM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...