Question about EnGenius EUB9707 Wireless N Mini USB Adapter

1 Answer

Installed this driver and everything installed ok except it can't aquire network address

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 108 Answers

Computer not able to acquire the IP address is not an issue with the wireless adapter all-together. Check the device status for this Wireless N Mini USB wireless adapter under the Network Adapter category. It should say: This device is working properly.
If this is the case, you may check for any driver updates with the manufacturer.
Check for any Firewalls like Norton, McAfee, Zonealarm, Comodo, etc. Turn them off or configure them properly.
Update the operating system using Windows Automatic Updates.
On the wireless transmitter, try changing the wireless security type as "WEP" preferably 64-bit WEP with a hexadecimal password.
Finally, if even that doesn't help, try to assign static IP on the wireless network connection by right clicking on Wireless Network Connections and click Properties. Now ensure a tick next to Internet Protocol version 4. Highlight it and click on Properties on this page. Refer to your wireless router or wireless modem vendor to get this assigned.

For further clarifications, please revert!
Thanks for asking.

Regards,
Arvind S Iyer

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get my ne10 to connect to wifi


Try to reboot BOTH devices, remove power from Both devices and reboot. I'm not sure what a ne10 is? The "aquiring network adress" is it's try to aquire the IP address. If you power everthing down it should reset everything. You question isn't very clear. I don't know what "IT' is? "when i try to connect "it" to my web cube "it" just says aquiring network adress how do i get "it" to work properly please"?

Nov 13, 2012 | Samsung NC10-14GW Notebook

1 Answer

Broadcom 802.11b/g Wlan adapter Everything works except it gets stuck on aquiring network adress. Everything is on auto-detect. I get good signal strength from the router. I accessed the gateway fine...


Hi

This Error will come with two condition:1) your ip is conifg and 2) your DHCP server is off.


Check this both and let me know if u get same error again

May 11, 2011 | Socket Go WIFI 80211ABG Sdio Wlan...

1 Answer

I have a canon leser mf4360 printer. i installed that printer peoperly usiner network interface. i have get print document peoperly but i having a scanning problem. i installed network scangear software...


step1 Install Printer drivers, after that install presto page manager....after it install ----- color network scan gear......after install it go to scan gear tool click on discover your printer IP address will appear in list then select that IP address .....exit form the tab.

go to the presto page manager............go to file ..select aquire image data press ok ok..then click on scan button....It will work

Dec 24, 2009 | Canon Office Equipment & Supplies

1 Answer

Nx6110 network not working


have you installed proper drivers,if not download it from the below mentioned link

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=449878&prodTypeId=321957&prodSeriesId=449877&swLang=8&taskId=135&swEnvOID=1098

and installing the drivers check for the further configuration.

if dhcp not enabled in your modem then you have give the static ip address

Regards,
pp

Dec 02, 2009 | HP Compaq nx6110 PC Laptop

1 Answer

Problems connecting, stuck on aquiring network/renewing IP addres


i want to down load the mother board drivers and utilities c.d,how will down load

Sep 01, 2009 | Intel 2915ABG 802.11a, 802.11g/b Wireless...

1 Answer

Aquiring network address


you just need to check if it has gat drivers i would advice you download via google and install.to your success .

Jul 04, 2009 | Dell Inspiron 1300 Notebook

2 Answers

Can't get my adapter to connect...XP is stuck with Aquiring a network address.


Have had this same problem. This worked for me. Remove the adapter, uninstall linksys, if it is installed, restart the computer, insert the adapter, when found new hardware comes up, let windows use the install wizard to install the adapter. Sorry to say, i have used this method on 5 pcs and it failed on only one. Let's hope yours will also be possitive. Good luck.

May 04, 2009 | Linksys Wireless-G WUSB54G 802.11g/b

1 Answer

Aquiring Network Connection over and over. RAWR


How many DHCP devices are there on the network?
There should be only one. Try disabling the DHCP in your device, then your neighbours router should issue IP addresses and all will be ok.

Apr 26, 2009 | NetGear WGR614 Wireless Router

2 Answers

Laptop can't aquire IP address


This sounds to be a compatibility issue with either the wireless software or wireless card. Check to see if there are any updated drivers for the wireless card at IBM's support site. If there aren't any or the card still doesn't work after the updated drivers are installed, then you might try a different/newer internal wireless card, or a universal external wireless card for use with your home system.

Jul 30, 2008 | IBM ThinkPad R51 Notebook

1 Answer

Can't connect to internet


It sounds like the driver for the USB network device is not loaded correctly. So, you'll need to reinstall it from scratch. Unplug everything, install the software, then reattach the usb cable to the PC.

The other thing is, did you DISABLE the network adapter that was already in your PC when you added the USB network adapter? If not, you need to do that. If they are both active but only one is connected, the system could still be trying to use the other network adapter and tying up the resources in the process.

Jun 23, 2008 | NetGear : WG111 54 Mbps Wireless USB 2.0...

Not finding what you are looking for?
EnGenius EUB9707 Wireless N Mini USB Adapter Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top EnGenius Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

rdarell

Level 1 Expert

6 Answers

Karen Gibson

Level 1 Expert

16 Answers

Are you an EnGenius Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...