Question about Brother DCP-7030 Digital All-in-One Laser Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: drum error
With that error you need to remove the drum, run the little blue tab on top back and forth about 20 times, blow out the area below the blue tab, and re install and try printing again. If the error is drum life end you need to open the front door and press either menu or options, sometimes the clear/back button and tell it it's a new drum.
Posted on Dec 30, 2009
SOURCE: I have this problem too (
if you have consciously attempted the procedure suggested on the maintenance guide and you still have that error you may have to contemplate the possibility of replacing the drum.
Posted on Mar 30, 2010
If you look at the Brother website you will find a trouble shooting guide for your machine.
In the guide, for the error you quote Brothers guidance is to check for a stuck piece paper, however it also states that if the printhead is hard over to one side (righthand side if memory serves me correct), then to contact Brother. If you do so, Brother will tell you it needs to be serviced by a Brother agent, which will likely cost you more than a new one !
If it isnt a stuck piece of paper, the problem is due to the fact that Brother machines excessively self-clean. Each time they self-clean a small amount of ink is dumped in to a holding tank/sponge. When a predefined number of self-clean operations have been performed, the machine refuses to print and gives the error message you have stated. Brother state that the tank/sponge must be replaced before the counter is reset, again by a Brother agent.
However, there is a way of reseting the self-clean counter yourself - if you Google your model number and the error code somewhere in the results you'll find how to do it. The only risk of doing this without changing the tank/sponge is that it will eventually overflow and leak out the bottom, but I did my Brother all in one some time ago and have had no problems yet.
Posted on Nov 04, 2010
check the drum, remove it and and check if the connector of the drum to the printer is ok, after returning the drum to the printer turn off your printer remove the power plug from the wall outlet and same also at the back of the printer. after five minutes power on the printer.
just leave a comment i will assist you.
Posted on Mar 10, 2011
Tips for a great answer:
Jan 24, 2013 | Brother DCP 165C Compact Color Inkjet...
Jul 01, 2011 | Brother MFC 7840W Printer
Mar 10, 2011 | Brother DCP-7030 Digital All-in-One Laser...
Jun 29, 2010 | Brother IntelliFax-2820 Laser Fax
Mar 30, 2010 | Brother MFC-7440N Laser Printer
Dec 30, 2009 | Brother MFC 7840W Printer
Sep 01, 2009 | Office Equipment & Supplies
Mar 21, 2009 | Brother MFC-7440N Laser Printer
363 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: