Question about Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

The lens of my Sony Cyber-shot goes in and out ehrn turned on--the device then says to turn off then on again but it still won't work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,194 Answers

Hi,
This error indicate that focusing ring got stuck or jammed due to dust or sand enters the camera. What you can try to do is spray some compressed AIR into the lens to try to free up any sand or dust that may have worked its way in. If that doesn't help, you can gently bump the camera to try to free the focusing ring.
or.......
May be battery is not holding charge or possibly loose contact between the camera & battery terminal, Make sure that your battery is fully charged.
You can try to turn camera ON at the table (facing it to the ceiling), don't put camera down face to the floor when opening.
Else your camera need to be disassembled to get at the focusing ring at Service Center.

Thanks...!! 4 thumbs rating keep us motivated to answer more free questions.

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LENS PROBLEM


Maybe you can take a look to the Sony Cyber-Shot DSC-W80 Manual for finding the answer.

May 01, 2012 | Sony Cyber-shot DSC-W80 Digital Camera

2 Answers

When I turn on sony cyber-shot camera I get a screen display that states "access". The lens keeps going in and out and then it states,"turn the power off and on again" What's...


When I turn on sony cyber-shot camera I get a Problem with the Sony Cyber-shot DSC-W35 Digital Camera when I turn on sony cyber-shot camera I get a screen display that states "access". The lens keeps going in and out and then it states,"turn the power off and on again" What's wrong??

Oct 12, 2011 | Sony Cyber-shot DSC-W35 Digital Camera

1 Answer

Sony Cybershot DSC-W150 camera lens are out and won't turn on


Hi,

Here is a tip that I wrote about How toget a Digital Camera Lens to work again

Steps toRepair a Digital Camera Lens
heatman101
';
';
';

May 21, 2011 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Sony Super Steadyshot DSC W80 and lens keeps going in and out


Hi, Focal lens out of sync. camera cannot initialise. Lens requires manually resetting. If you in the U.K , I can help you out.
p.m me at kiddo242@hotmail.com

Aug 11, 2009 | Sony Cyber-shot DSC-W80 Digital Camera

1 Answer

Lens goes in and out and error message 'turn


this message comes up if you have dropped your camera. try tapping the device while the message comes up. if that doesn't work then you have to take it to the sony service centre to replace the lens array. it costs about 60$ to replace it.

Jul 31, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

SONY CYBER SHOT NOT WORKING


Hello samtx930, "turn off the power and on again" its a very commen problem and occurs when the lens block assembly start malfunctioning. Actually the slide motor not work properly and until the lens not come out completely the camera will not work, that's why the error message appears "Access" and then screen shows "turn off the power and on again". In this situation you have to replace lens block assembly.And the part No. is with description is given below: 1-788-363-11 OPTICS UNIT (ED13A) Thanks for using fixya.

Jun 14, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

Sony DSC-100


I had the same problem with the same camera, I took a pair of pliars and pulled on the the lens (pull it all the way out). Now it works again fine..Just like its supposed to..

Aug 13, 2008 | Sony Cyber-shot DSC-W100 Digital Camera

2 Answers

Sony Cyber-Shot DSC-W30. The lens is in a "stuck" position


You have a bad lens, it prob. also says turn off and on again.

Jun 30, 2008 | Sony Cyber-Shot DSC-S90 Digital Camera

1 Answer

Sony Cyber -Shot


try gently pulling and twisting the end of the lense and i mean gentle dont pull till it pops than switch it off and on again and you problem should be solved

Jun 21, 2008 | Sony Cyber-shot DSC-W80 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot DSC-W50 Digital Camera Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

1998 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

20020 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...