Question about HP LaserJet P3005n Printer

1 Answer

How to replace fuser unit - HP LaserJet P3005n Printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • HP Expert
  • 202 Answers

Hello,go to back side of printer & open the flap u will found two serews open them push the tray & open the two locks at right & left bottom then back pannel will come out.pullout the white strip where the power connector inserted you will find fuser connector (black,white wires)open 4 screws on which fuser wire attached detach two connectors situated right side wall of printer& you will find a teeth lock on the bottom side of fuser press the two leavers & pull outwardly & also pull out the unit outwardly & do as viseversa for fixing the unit.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change out the fuser fixing unit on a Kyocera FS3900 DN


1. Draw the rear unit.
2. Insert a flat-blade screwdriver to push the
fuser lock (gray colored) on the rear unit and
the fuser unit is separated from the rear unit
(rails).
Do it both ends of the rear unit.
3. Check or replace the fuser unit and refit all
the removed parts.
Place the fuser unit on the rear unit (rails)
and push the fuser lock so that the fuser
lock catches the fuser unit.
Do it for the both ends of the fuser unit.

Aug 08, 2014 | Kyocera Mita FS3900DN Fuser Fixing Unit -...

1 Answer

Kyocera 4500ci showing error 6600


Broken fuser heater wire


Fuser unit 1. Check that no paper jam is present.

2. Confirm that the wiring connector is

firmly connected and, if necessary,

connect the connector all the way in.

Fuser unit and Engine PWB (YC26)

3. If the wiring is disconnected, shorted or

grounded, replace the wiring.

4. Replace the Fuser unit and execute

U167 counter clear (see page 1-3-90).

(Deteriorated sensitivity due to the toner

adhered to the center thermistor.)
replace the fuser
repls

May 02, 2014 | Kyocera TASKalfa 180 Copier

1 Answer

Error fuser unit hl-5350Dn


The fuser unit is located at the rear side of the printer.
Fuser unit error indicates one/more of the following.
1. The fuser roller/film life is over. Replace with new one
2. The fuser film is torn. Replace with new one.
3. Fuser heater is burnt. Replace the heater.
4. Fuser thermal sensor is open. Replace it.

sonsunny

Jun 28, 2011 | Brother HL 5250DN Laser Printer

1 Answer

Erro 50.2


The 50.2 code on nearly all HP laser based machines including your M2727nf means you have a fuser error. The fuser unit is the assembly that heats up and "fuses" the toner onto the paper. There are a few things you can try including, power cycle the printer and see whether the code resets or try reseating the Fuser Unit. Neither of these will resolve the issue in most cases. Most of the time fuser unit replacement is necessary.
Here is a link for you to see pricing and a picture for your fuser unit. You may want to just buy your own fuser and replace it if your are mechanically inclined. If not you can have a local printer repair shop replace it for you. At least they won't rip you off on the price of the fuser unit.
http://www.precisionroller.com/search.php?q=m2727nf+fuser
Good Luck and Thank You for using Fixya.
WheatlandServices

Dec 23, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

I have a 50.2 fuser erro on our Color Printer HP 4700


The 50.2 code on nearly all HP laser based machines including your 4700 means you have a fuser error. The fuser unit is the assembly that heats up and "fuses" the toner onto the paper. There are a few things you can try including, power cycle the printer and see whether the code resets or try reseating the Fuser Unit. Neither of these will resolve the issue in most cases. Most of the time fuser unit replacement is necessary.
Here is a link for you to see pricing and a picture for your fuser unit. You may want to just buy your own fuser and replace it if your are mechanically inclined. If not you can have a local printer repair shop replace it for you. At least they won't rip you off on the price of the fuser unit. Note that there may be some cheaper prices out there on this unit.
http://www.precisionroller.com/search.php?q=hp+4700+fuser
Good Luck and Thank You for using Fixya.
WheatlandServices

Dec 23, 2010 | HP Color LaserJet 4550hdn Printer

1 Answer

WORN FUSER? WHAT DOES THIS MEAN PLEASE


that means there is a fuser unit back side of u r printer this is the main unit where printing happens actually. I think there may be problem with fuser unit...may be paper jam or sensor problem..replace the fuser unit

Jul 06, 2009 | Epson Aculaser C1100 Printer

4 Answers

Put in newer fuser unit but machine still says to replace


If you want to clear the fuser message you have to be sure you replaced the fuser web. Then go to 25 => counter clear(items 13)=> Clear fuser counter or 36=>counter clear(items 8)=>Clear fuser counter.

May 28, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Big noise


If the printer was not making the noise before you replaced the fuser unit I would try the following:

1. remove and re-seat the new fuser unit and try a test print.

2. if it still makes noise, remove the new fuser unit and replace the old fuser unit and try a test print. (if you waited untill the printer refused to print on the old fuser this might not work).

If you don't get the noise with the old fuser, then it's possible that the new fuser is defective. You could try returning it for replacement at this point. If you still get the noise with the old fuser, then possibly it is not seated correctly or the latches aren't locked or there is some other unrelated issue.

Jun 25, 2008 | HP LaserJet 2420 Printer

Not finding what you are looking for?
HP LaserJet P3005n Printer Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...