Question about Canon Office Equipment & Supplies

1 Answer

Canon pixma ip 1500 prints a 1/2 inch wide bar just before print exits printer

Posted by on

  • kslinkar May 30, 2008

    After trying several solutions, it appears to have something to do with the print roller. After cleaning the print roller 3 times the problem has virtually disappeared. Thanks for the suggestion, though.
    Karl Slinkard


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 85 Answers

Hi Most printers have a NON PRINTABLE border around edges and usually wider at the bottom.
Plan your layout with that in mind get to know extremities.
To check TRY using PRINT PREVIEW it will show area to print.

Tinteiros (Ebay)

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon pixma ip 1500. Will not print black ink. Have cleaned, and deep cleaned nozzles. Color prints good, black does not print at all.


Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

Jul 01, 2011 | Canon Office Equipment & Supplies

1 Answer

My canon ip 1500 will not print anything. It


it may have reached its limit. these printers have counters. you will need to take it to canon for a reset.

Jun 19, 2010 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

When printing, a black stripe is printed on the back side of the printed pages (about 1/4'' wide, running from top to bottom). The ink strip bleeds through to obscure printed side. Any suggestions?


You need to have the exit rollers cleaned at a shop, and a mylar strip added to keep that from happening again. It's the ink from the cleaning station backing up thru the exit rollers.

Dec 03, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Canon PIXMA iP 1500 does not print


Hi,
1 press menu
2 PRESS scan copy scan to enter service mode
3 use > to go to NVRAM ACCESS
4 set ABS-M LEVEL TO 0
5 Set ABS P LEVEL TO 0
6 Set press STOP to EXIT
Thanks

Thiru

Jun 17, 2009 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

Printer not printing


find the maintance section of your print driver display ( far right of the display ) should see a maintance tab.
do a cleaning cycle or a deep cleaning cycle and see what happens. it should start printing.
if necessary make up a solid single color block on a windows word doc using the squares make them no line perimiters and do a black blue red and yellow about 1/2 inch tall and 7 inches wide
as a test pattern. the color that doesnt print is clogged
in the future try not to let the inks run completly dry before they are replaced.
if that doesn't help use isoprople alcohol 91proof on a cotton swab or clean cloth and let the print head soak in it for 5 minutes and try again.

Feb 16, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Wide black streak on back of printed paper


Hi,

it is not directly coming from the head. Probably you are printing your photos without borders. This means that the printer prints slightly beyond he paper. As a consequence is sprays ink on the mechanics and after a while it starts to smear on the back of the paper.

This phenomenon is even mentioned in the printer manual (kind of caution when selecting borderless printing).

There is a menu item in the printer utilities that lets you clean the printer mechanics with a folded paper. I tried this, but it helps only little.

I have the same effect on a pixma IP 4500 , and I live with it.

Cheers

Critter


Dec 29, 2008 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Canon pixma ip3000 print problem


tthanks about that but i dont know how to deel with that

Dec 05, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1772 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...