Question about Lands Phones
We have been away for 5 months and the ohone will not work. Othe phones on that line do work. We put a new battery in and charged it and it still does not work. It will light up - but no dial tone.
Lisa, If the 900MHZ phone is Model 26928M programming for rotary dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for touch-tone use. To set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You will hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing. 3. Press the program button again. You will hear a confirmation tone.
Posted on Sep 30, 2007
SOURCE: Phone line/phone jack problem
The wiring on the jacks is set up for a 2 line phone.
If you take the jacks apart, you will see either:
A) red, green, and black, yellow
B)white blue/blue white and white orange/orange white
You need to swap the pairs.
If there are red/green/black/yellow wires. remove the yellow/black and move them to where the red/greens are. Then put the red/green wires, where the yellow/black used to be.
OR, you need to swap the orange and the blue wires.
Posted on Dec 22, 2007
I just purchased the Trimline Model 29265 phone and in the instructions it says that it can be wall mounted if you reverse the handset hook in the base? Where is the handset hook and how do you reverse it. Nothing in the instructions tells you where it is nor how to fix it.
Posted on May 07, 2009
Tips for a great answer:
Apr 01, 2010 | GE Spacemaker JVM1640SJ Microwave Oven
on Feb 01, 2008 | GE Telephone pr521w
Oct 26, 2009 | GE Spacemaker 26976 Cordless Phone
Oct 23, 2009 | Thomson Lands Phones
Oct 14, 2008 | GE 25922 Cordless Phone
Mar 25, 2008 | GE 29460GE2 Corded Phone
Jan 05, 2007 | GE 21018GE3 Cordless Phone
253 people viewed this question
Usually answered in minutes!