In faxing from the HP Laser Jet 3050 I want the machine to print out a page showing that the fax went through. Help.

Hi:

Make sure that it is set to Auto Receive not Manual Receive. Also make sure the the telephone line cord is plugged into the Line jack not the Tel jack on the back of the fax machine.

Hi Dear

HP LaserJet 3050, 3055, 3390, 3392 AiO Product - How to Print a FAX Confirmation Report Description By default, a Fax Confirmation report (Fax Call Report) will only print when a fax error occurs. However, this option can be changed using the printer control panel.

1. Press the right arrow until Reports appears in the display, press the checkmark.
2. Press the right arrow until Fax Call Report appears in the display, press the checkmark.
3. Press the right arrow until Print Report appears in the display, press the checkmark.
4. Right arrow to the option of choice, press the checkmark to save the change.

FAX call report options

• Send Fax Only - a confirmation sheet will only print when a fax is sent
• Never - no fax confirmation sheets
• Every Error - default setting
• Send Error - a fax confirmation prints when the fax transmission encounters an error
• Every Fax - a fax confirmation sheet will print for incoming

The scanner in your FAX is nothing working -- i.e., "100%-black" or "100%-white", and so what is transmitted is what the scanner has scanned, improperly.

The problem is the driver for printing
Here you can get the latest version of drivers for the operating system you have. http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1140778&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=1140783
Have deleted the old driver from Device Manager - Printer and Faxes (if using XP).
Then reinstall the version you get - the safest try PCL5e version. If you have drivers for printers you do not use them would be better to remove them and on them.

If you are scanning using the Auto Document Feeder be sure to clean the glass where the documents get scanned. A small speck will cause a line down the page. On HP there is often a narrow strip of glass on the left side of the platen glass.

Every print job, copy, and fax have the solid black line across the pages. I have changed the drum and the cartridge and even tried cleaning mode. Please help!!! I have a HP Laser Jet 2840 All in One

Do you have a dial tone?

I thought you would help me with my problem not try to sell me a service plan. The problem is resolved and the machine is now working properly. If you want to know how it was achieved send $19.95 for the answer.

go here

Hello All,

Please perform the following:
Super NVRAM init
When a super NVRAM init is performed, the all-in-one language and telecom country/region settings
are undefined. The user is prompted to set the language and telecom country/region. Until these settings
are defined, the all-in-one will not return to the Ready state.
CAUTION A Super NVRAM init erases all data that is stored in both the unprotected and
protected NVRAM memory.
To perform a super NVRAM init
1. Turn off the all-in-one.
2. Press and hold down the * and 5 buttons.
3. Continue to hold down the buttons while you turn on the all-in-one. Hold the buttons throughout
the entire power-on sequence.
4. When Permanent Storage Init. appears on the control-panel display, release the buttons.
5. When prompted, set the language and telecom country/region.
6. Allow the all-in-one to return to Ready before using it.