Question about Sony Televison & Video
Thanks for using FixYa. The issue is with the failed convergence (STK) ICs which needs tobe replaced. It's not a difficult job if you want to do this yourself, you should require some basic knowledge about soldering-resoldering components. To start with you'll have to open the back of the unit and then replace the ICs(STK ICs) which are located behind the black heat sink and also check the resistors as if they are short the ICs might blow again after sometime. There are repair kits available which includes repair instructions with the parts, if you want to do it yourself, you can buy and repair it yourself. Please rate the solution if the issue is resolved or post a comment for further assistance.
Posted on Oct 08, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 24, 2010 | Sony KP-53HS30 53" Rear Projection...
Apr 18, 2010 | Sony KP-53HS30 53" Rear Projection...
Sep 28, 2009 | Sony KP-53HS30 53" Rear Projection...
Sep 20, 2009 | Sony KP-46WT510 46" Rear Projection HDTV
Aug 15, 2008 | Sony KP-53HS30 53" Rear Projection...
117 people viewed this question
Usually answered in minutes!