Question about Singer CE-200 Quantum Futura Computerized Sewing Machine

1 Answer

Desgin stitch out on Futura 250

I actually have the CE-250 but it was not in the list
I have a bought designs that I am having problems with. I have checked back where I purchased and they said that they stitch out fine for them. When I try and stitch out the design it will do ALL of the bottom stitch but the top (satin) stitch it is skipping areas on the flower??? Someone told me that if the satin stitch is more than 9 mm it will not stitch out???? Is there anyway to fix this??? I do not know about buying designs if I do not know if they will stitch out?

I had also tried a cheerleader who had fringe pigtails and it was like they were not even there??? I am assumging that what is happening now is the same thing? But some of the petals it is stitching but some it is leaving out part of the satin stitch the lady says it is stitching fine for her????? Thanks for any help that you can give me.

Posted by on

  • 2 more comments 
  • pammi622 May 30, 2008

    I did all that it is not that. Though. The machine does not even see part of it. When you go to stitch out and the boxes across the bottom. Even in that picture it has missed places in the picture. It is like holes in the design. I was told that it was that the satin stitch was probably over 9 mm???? Not sure. This is on any fabric I have tried we have tried me downloading in different formats too. But thanks for your thoughts. Wish that was it????? It will stich one petal fine the next miss sections. Not just skip a stitch and then the next petal do fine???? Does t


  • marshed Apr 30, 2009

    My sewing machine doesnot show any stitches while I stitch. How could I solve the problem?

  • willandcar May 20, 2009

    I am having this same issue when I make large letters using Monogram Wizard. I talked to someone at the software company and he said that they convert wide stitches into jump stitches and it sounds like my machine is skipping those. He says that the machine probably thinks that the jump stitches are unecessary and is trying to "clean up" the design. Does anyone know how to make the machine stop doing this?

  • Anonymous Mar 28, 2014

    Has worked previously.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

It sounds as though the design is stitching but the machine is skipping stitches. If this is the case, be sure you hoop the tear away in the hoop with your fabric.Make sure the fabric is taut. Use a new needle and a good quality thread.If this doesn't solve your problem, try the design on a different type of fabric.

Posted on May 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why cant i install futura ce 150 softwRE with windows 10?

Singer Futura CE-150, I NEED HELP!!! - FreeEmbroideryStuff ...

Jul 11, 2014 - 15 posts - ‎10 authors
I just got the Singer Futura CE-150 and every time I start a design it ... Posts: 2/10/2014 11:18:44 PM, RE: Singer Futura CE-150, I NEED ... Futura CE-100but didn't realize it didn't have its original install cd with ... I can't afford Singers price. ... -Software-Download-and-Installation_A287.aspx?id=287&siteid= ...

Singer futura ce-350 software download - Google Docs Google Docs, Sheets, and SlidesJavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload. ... Singer futura ce 150 embroidery machine 3900 designs dvd. Top 3 singer ... Singerfutura software for windows 10 memphis soft portal. Using my singer ... Singer futura software installation for windows 2000 xp youtube. Service ...

Singer Futura CE-250 Sewing and Embroidery Machine w

SINGER® FUTURA™ Software Installation for Windows ...? 7:20 30, 2009 - Uploaded by SingerSewingCompanySINGER® FUTURA™ Software Installation for Windows 2000 & XP ... yes i already have a singer ...Singer Futura will not work with Windows 7 - Microsoft bought a Singer Futura sewing machine and a Win 7 laptop for Christmas. ... can find the right person at Singer to talk to they might let you have a pre-release version of thesoftware. ... What if you download the patch and it still doesn't work? ... if you are using ce-150 go to

Dec 30, 2015 | Sewing Machines

4 Answers

I am having the same problem as angelmdb.. I have a new computerized futura and am trying to just straight stitch with it.. it starts off fine for about 8 stitches then beeps and stops.. i wait it will do...

Go to and under customer support, look at frequently asked questions, they have alot info there. If, that doesn't work for you, call customer service at 1-800-4singer and they can advise you

Sep 20, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

My futura doesn't recognize the downloaded design. What could be the problem?

Make sure the design isn't still in zipped format. I've done this before, forgetting that I needed to double click on the zip file and unzip it to actually bring out the designs. Also make sure the design format is one that your Singer machine will read. There's a list on and on the website of the designs the machine will read.

Hope this helps!

Jul 07, 2010 | Singer CE-100 Futura Computerized Sewing...

1 Answer

I have a Futura Ce-150. Do I need special

List of supported by Futura software design formats could be found in the software manual or on futura-support site:

Feb 06, 2010 | Singer CE-100 Futura Computerized Sewing...

3 Answers

Future CE-250 software compatible with Windows 7?

I just bought a new Futura CE250 & had the same problem.

I fixed my "can not run an x86 build of this utility on x64 platform" by visiting the futura support website & downloading a service update. I have a computer with Windows 7 installed.

The website is

When you are there, click on the link on the left for "Service Updates."

The actual link to where I downloaded my udate is:

Happy Embroidering!!!

Jan 19, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Design is ready, when green light is pressed nothing happens

I have had good luck contacting the Singer peoplee themselves. Sometimes it takes a couple of days for them to respond. But, if that doesn't help try this.

Can you go forward a few stitches annd then start?
If not, try condensing your design by 1-2%. This was recommended to me by Singer when I had part of a design that wouldn't stitch out. It did the same as your whole design. I tend to think it is the digitizer, not the machine in my instance. Have you tried another design by a different digitizer?
Hope this helps.

Jul 19, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Create my own designs

Your CE 250 allows you to do very basic digitizing by using Autopunch.

To activate autopunch, click on "create" from the top menu and select "autopunch" from the drop down menu. A new Autopunch wizard menu should open. Click on "next" on the browse to your jpeg file by clicking on "select". Keep on clicking on "next" until you get to the "customize stitch block" menu. Here you are able to remove unwanted blocks or change the stitching order by clicking on a block in the right hand menu and the clicking on the "Remove", "move up" or "move down" buttons.

By clicking on the radio buttons, just below the "move down" button, you can also select between Fill stitch or Satin stitch. When you are happy with your decisions, click on next and click on finish.

That is about all that you can do and autopunch will do the rest. I suggest you import a couple of dfferent clipart images and play around as discribed above to make you familiar with the program. You will also see different results by changing options.

If you are not happy with final results, I suggest you invest in a proper digitizing program, such as Creative Drawings. Visit the at

Good Luck

Nov 19, 2008 | Singer CE-200 Quantum Futura Computerized...

2 Answers

Singer futura ce-200 problem, pattern mis-alignment

I have had similar problems in the past.
Do you hear a noise from the embroidery unit when the misalignment occurs ? If so, I suspect that your issue may be that you have some resistance under the hoop. Is there extra material that may be rubbing on the machine or catching somewhere. I have found that if I use some masking tape to keep all of the extra material from hitting any other parts of the machine or dragging under the edge of the hoop this error does not occur. FYI: I also stopped using the "optimize stitch speed" option at the same time. I believe that material dragging was causing the problem, but I still wonder about the stitch speed optimization feature.

Jun 03, 2008 | Singer CE-200 Quantum Futura Computerized...

3 Answers

Other brands of Software

You can only use the futura software, autopunch, hyperfont and cross stitch

Oct 29, 2007 | Singer CE-200 Quantum Futura Computerized...

1 Answer

CE-200 - Vista

futura software large design stitch

Sep 27, 2007 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Singer CE-200 Quantum Futura Computerized Sewing Machine Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Cindy Wells

Level 3 Expert

5380 Answers


Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides