Question about Samsung PCL6215R 62" Rear Projection Television

1 Answer

Reply Thanks for your reply.. It was very helpful to know I have to buy 2, which I recently purchased on Ebay and found a service manual as well.. Question, It seems like I need to solder the new one (24 progs each) onto the board? Is this correct? Also, seems like there is some type of adhesive (not sure what this white stuff is) and that I need to remove the adhesive to the metal fin. I think its some thermal glue that says the only way to remove it is with rubbing alcohol?? Does this sound like I am on the right path to the above? I really appreciate your knowledge as I am not a tv repair guy..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 8,617 Answers

Yes the white paste is heat sink compound which transfers heat. Be careful using ICs from places that your not sure of as most sell cheap chinese knock off and not the origional Sanyo units . STK ICs are made by sanyo, but be aware when you use cheap knockoff chips as they can short out usually within minutes and cause alot of extra problems such as causing resistors to go open. I just helped a guy last week that spent 5.99 on new ICs installed them and proceeded to burn every resistor in his convergence circuits when the new ICs he purchased on line shorted out. Let me know how you make out.

Posted on May 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having trouble3 changing bulb, please explain how. There are not any technicions in this area that can workon this television... Thanks


Hi Kerrylynn Dudley,

Sorry for the late reply, I'm offline upon purchasing my service.

If you are getting trouble replacing the bulb on your Philips DLP TV, you may follow the steps below.
1. Remove the rear cover by unscrewing the fixation screws (1).


10_10_2011_9_43_52_pm.png

2. Pull-out the lamp unit with grip (2)

10_10_2011_9_46_16_pm.png

3. Remove nut and lock washer (3).


10_10_2011_9_49_59_pm.png
4. Remove screws (4).

Wear gloves upon replacing the bulb to ensure that you will not touch directly the the front glass and make a finger print that will shorten the life of it...

Also, watch the video below for more info.


Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Jdvillanueva

Oct 10, 2011 | Philips 50PL9126D/37B 50" DLP TV

1 Answer

Set turns off about i hour it is on, goes light,then pops then black screen.no pic no sound.wait awhile turn it back on ,it's ok.then it does the same thing


Hi gus derocco,

Thank you for purchasing my service.
Sorry for the late reply, I'm offline upon purchasing my ads...
I would advice you to clean the inside of the unit from dirt/dust build-up using the compressed air can to avoid excessive heat that may caused the subsequent shutdown. You can buy it from your local electronics supply, ebay.com, home depot, etc... Make an extra care upon cleaning most especially on the board, you may used small paint brush with fine/soft bristle to help dusting.
Jdvillanueva

Oct 06, 2011 | Projection Televisions

1 Answer

LIGHT FLASHES 2THEN A PAUSE THEN 2


I think I already tried to help you.

2,2 is short protection--98% chance one of the two pico fuses that protect the convergence circuit are bad.

This means the fuses and both STK-392-570 chips need to be replaced.

If you reply to this post I can post step by step instructions and photos of the fuses and the chips.

ALL PARTS NEEDED ARE ON THE MIDDLE CIRCUIT BOARD AND TOTAL PARTS COST SHOULD BE UNDER 30 DOLLARS--I can tell you a seller on EBAY WHERE I BUY MY PARTS.

sd tech

Jun 10, 2010 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Part number for mirror in Sony KDP-51WS655


Sony Part Number: 2-023-094-01 I WENT TO A WEB SIGHT CALLED WWW.PARTSTORE.COM U MAY WANT TO GO THERE AND MAKE SURE ITS WHAT YOUR LOOKING FOR IT SAID A MIRROR (51)

Mar 07, 2009 | Sony Grand WEGA KDP-51WS655 51" Rear...

1 Answer

Flyback transformer?


Its either the flyback or a regulator. But i would need the model number of your set in order to know for sure. Please reply to this same post with your model number.

Aug 02, 2008 | Projection Televisions

1 Answer

I recently had to disconnect all of my TV, DVD etc and do cannot find the manuals to connect it all. I have a Samsung HD TV, PVR, DVD, Video to connect and would like to know if you have a diagram I could...


Thanks but no thanks for your offer of the premium service - I can buy the new manual for the same price so I will look for my manual and reject your assistance. Besides I can't be expected to pay for your solution yet give you my solution if I found it for free surely! Cheeky.

Jul 13, 2008 | Samsung Projection Televisions

1 Answer

Help?


The ICs are definately not origional Sanyo ICs at that price. To remove the old heat sink compound I usually just scrape it off with a jacknife it doesnt hurt the heat sink what so ever. as far as the ICs I always refer people to the site that I work for as a repair tech, since I know they are origional ICs as they sell them a little cheaper than most suppliers due to the discount they get for purchaseing alot of ICs so they pass the savings onto the customers as their main business are the service manuals. If you want to check their site out heres the link.
http://servicemanuals.vstore.ca/

May 29, 2008 | Samsung PCL6215R 62" Rear Projection...

1 Answer

WD-52327


Email me... I have a link in my other laptop for the serice manual download.

Whats wrong with the tv?

Nov 13, 2007 | Mitsubishi WD-52327 52" Rear Projection...

1 Answer

Schematics?


The Gateway model DLP56 TV is made by Delta Electronics. I emailed their technician and got a reply which I have pasted below: ___________________________________________________________________ Dear Hardrocko, Thanks for your interesting on our Product and apologize for my late reply. We are not able to provide out service manual due to the agreement with our service third party contractor. Please follow the product's user manual troubleshooting procedure for the problem solving. For any further question, please feel free to let us know. Best regards, Andy Lin Product Marketing PTV/VDBG Delta Electronics Inc. ________________________________________________________________ As you can see they are not willing to help. Perhaps if you describe your problem someone on this site could help. If not you will probably have to have it looked at by a authorized repair facility. Sorry I didn't have a lot of good news. Send us a description of your problem and I will try to help.

Jul 06, 2006 | Gateway DLP56TV 56" Rear Projection...

Not finding what you are looking for?
Samsung PCL6215R 62" Rear Projection Television Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...