Question about Xerox Phaser 6250 Laser Printer

1 Answer

Xerox 6250dp My printer suddenly decided to stop printing blue. The service pages have purple instead of blue. I have changed the print cartridges to no avail. There are light blue squares on the service pages, but no dark blue. New image unit? Image unit 41%. Fuser 95%. Transfer roller OK. 94006 pages. Thanks Bob

Posted by on

  • Anonymous Jul 10, 2008

    SAME PROBLEM BUT WITH MAGENTA

  • tom7919 Feb 21, 2009

    Same problem except magenta, Printed excellent again after changed image unit but is now back to very poor magenta coverage.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this problem when I used a generic toner. I installed a xerox cyan toner, then printed many sheets of a large blue rectangle. After about 15 pages the blue started to spread into the shape, after 30 pages the blue was back. Printing a lot of blue was necessary to get the new toner thru the system.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ESP9 color prints begin coming out purple like


Use only original ink cartriges, the non original has ink normaly is not for you printer, and you wast your money and damage the printer print-head

Jan 02, 2010 | Printers & Copiers

1 Answer

Toner is not out of ink but it lights up, refusing to print


In most cases cartridges have a special chip that remembers the toner cartridge serial number an amount of pages printed from it. This means, that even though there still might be some toner left in the cartridge, the chip's counter reaches it's predefined limit and informs printer, that the toner has run out. Just like that, suddenly.
It may also be the case, that the chip loses contact with the printer's electrical terminals - try reseating the cartridge in the printer. If that doesn't help, it's time to replace it I'm afraid.
Usually the printer will inform "toner low" for some time before it becomes "toner out" and refuses to print. If you get "toner low", then it's time to purchase a new cartridge to have it ready.

Oct 27, 2009 | Fujitsu Printers & Copiers

1 Answer

Color on photos suddenly has a blue - purple wash with no greens


Your yellow cartridge is probably not working as your photos suggest. Remove and reinsert the yellow cartridge. Try printing only yellow color.
Your printer has a separate head for printing; the nozzle for yellow ink might be clogged. Try running a head cleaning routine from your printer software.


Sep 15, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

My xerox phaser 6250 prints the first page fine then the black fades on the following pages


Your toner supply route is partially plugged and it can't keep up with the demand. It's not an easy process to clean it but a can of air, toner vac, and an area you don't mind getting dirty are necessary. Pull the imaging unit out and dig around, blowing and vacuuming out toner. Also, pull the black toner cartridge and work through that way as well. If your black toner is low, that might be the problem.

Jul 13, 2009 | Xerox Phaser 6250DP Laser Printer

2 Answers

I have a Xerox 6250DP. it was working fine until I replace the black toner. Now, the quality of impression is poor and the black color appears and dissapears


I bet you used a Generic toner (Mediaq Science?)
this will contaminate the developer and cause poor prints. Vacuum, Replace developer, replace toner (Xerox Brand). Good to go.

Jul 03, 2009 | Xerox Phaser 6250DP Laser Printer

1 Answer

Printer is printing wrong colors


Make sure it's the right ink cartridge for that model printer.
Check if any of the colors is out
Try running a calibration on the printer to make sure heads are lined up properly.

Link to the manual - Aligning print cartridges is on Page 70.
http://h10032.www1.hp.com/ctg/Manual/c00905552.pdf

Apr 06, 2009 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

Canon MP 730 prints wrong color tones


I was having a similar problem-- what was happening was the print cartridge head seemed to be letting the colors leak into each other. (the science behind this is beyond me!)-- I noticed that instead of being cyan/magenta/yellow, my yellow cartridge had actually turned green, magenta was picking up blue and was turning purple, etc etc. I ended up replacing the printer's printhead and all the color cartridges and then it worked.
You can order printheads online.
Not sure if this fixes the original reason why they got all mixed up in the first place-- if the printer will continue to allow the print head to leak the colors into each other-- but hopefully that's a fixit!

Aug 10, 2008 | Canon SmartBase MP730 All-In-One InkJet...

1 Answer

Printer Prints Blue Test Page but not in black


Your color cartridge is probably empty as well. you can go to>control panel>printers and faxes> your printer >right click on preferences then click on services. Do all of the maintenance possible on your cartridges and see if that helps. Are your cartridges HP cartridges or generic refills?

Apr 22, 2008 | HP DeskJet 810c InkJet Printer

1 Answer

Xerox Phaser 6250DP sensor not cleaning


Is there a specific code coming up? That can make it easier to pinpoint the exact problem.

Apr 19, 2008 | Xerox Phaser 6250DP Laser Printer

Not finding what you are looking for?
Xerox Phaser  6250 Laser Printer Logo

605 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...