Question about Office Equipment & Supplies

Open Question

WASP cash drawer doesn't seem to receive signal to open from epson printer

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Cash Drawer Command

The cashdrawer is SERIAL, you'll need to connect it to a COM port. The
software you're using has to be capable of sending data to the COM port
the cashdrawer is connected to when the cashdrawer needs to be opened.
From the site you mentioned:

Be sure drawer lock is not engaged.
Exit your system to a DOS prompt. Type the following commands (substitute
the correct com port for com1):
c:\>mode com1:300,n,8,1
c:\>echo "000000000000000000000">com1
The cash drawer should open.

About the cashdrawer RJ11 connection on the printer: You can connect any
solenoid driven cashdrawer to this port. The port uses pin 2 and 4 for
the voltage output, which is normally 24V on Epson receipt printers.
Sending a specific ESC character (every POS software should be capable of
doing this) to the printer will be recognized by the printer and the
printer puts 24V on the 2 pins mentioned for 300ms and voila, the drawer
opens.

Posted on Jul 31, 2008

  • 7 Answers

SOURCE: how to eject cash drawer pos

Open the Cash Drawer
Hex code
<1B><70><30><40><50>

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I open cash drawer with no sale?


Open cash Drawer ("No sale") Without Printing Receipt ...

helpdesk.lothill.com/support/discussions/topics/33085
We use an Epson- Receipt-Printer-driven Cash Drawer. When our staff use the No Salefunction to open the cash drawer, a short, empty receipt is printed. ... Instead, can Cashfootprint be enhanced to just send the Drawer Open command to the Receipt Printer?

Cash drawer (troubleshooting) - Shopify Manual


Dec 25, 2015 | Retail Supplies

1 Answer

I have reinstalled an Epson TM-T88II in a POS system that does not have a parallel connector. There is a D-Link fast ethernet print server model DP-301P+ connected to the parallel port of the printer. An...


The cash drawer is loking for a signal from the printer to fire the drawer. It is usually on one of the pins of the cable comming from the printer. You will probably have to contact the cash drawer manufacture for that information.

You can contact Southeast Digital Networks, Inc. for more info.

Tel 850-681-9528

Hours of operation Mon - Fri 8:00am - 5:00pm EST

Mar 06, 2011 | Epson TM-T88III (C420863)

1 Answer

Printing blank receipt every time cash drawer opens


I would try a complete reinstall to make sure the presets of the machine are correct.

May 27, 2010 | Epson POS TMT88IV Thermal Receipt Printer

1 Answer

I can't get my cash drawer to work is there a secret. I have enabled the cash drawer in digital dining but it won't open


You must be sure the voltage to the cash drawer and the printer are correct. A 24 volt RJ12 printre connection to the solenoid of a 12 volt cash drawer will cause damage. If the drawer was working and stopped, it is possible the solenoid may be the problem.

May 21, 2010 | Epson TM-T88III Thermal Printer

1 Answer

How to open cash drawer epson tm-t88ii printer


You need to have the correct cable to connect your cash drawer to that printer. What model of cash drawer do you have?

Apr 20, 2010 | Epson TM-T88III (C420863)

1 Answer

I have a epson tm t8iiip printer when trying to


Store OPs require OPOS software be installed and the printer and drawer setup within it.

Jan 23, 2010 | Epson TM-T88III (C420863)

1 Answer

How do I get the cash drawer to pop using the Epson TM-T88III and windows driver? I am currently using RMS as our point of sale system but do not want to use OPOS drivers as this printer and cash drawer is...


You can set this up under printer settings - Under Windows XP - At the control panel, click printers, right click the tm-t88iii printer and select properties. Click the 'Device Settings' tab and there *should* be a option to open the cash drawer after printing.

Nov 06, 2009 | Epson TM-T88III (C420863)

1 Answer

Cash Drawer Command


The cashdrawer is SERIAL, you'll need to connect it to a COM port. The
software you're using has to be capable of sending data to the COM port
the cashdrawer is connected to when the cashdrawer needs to be opened.
From the site you mentioned:

Be sure drawer lock is not engaged.
Exit your system to a DOS prompt. Type the following commands (substitute
the correct com port for com1):
c:\>mode com1:300,n,8,1
c:\>echo "000000000000000000000">com1
The cash drawer should open.

About the cashdrawer RJ11 connection on the printer: You can connect any
solenoid driven cashdrawer to this port. The port uses pin 2 and 4 for
the voltage output, which is normally 24V on Epson receipt printers.
Sending a specific ESC character (every POS software should be capable of
doing this) to the printer will be recognized by the printer and the
printer puts 24V on the 2 pins mentioned for 300ms and voila, the drawer
opens.

Jul 12, 2008 | Epson TM-U220 Matrix Printer

1 Answer

Cash drawer


Greetings,

From the computer (application to be exact), you send a signal to the printer to kick the drawer open but is there a confirmation signal from the printer going back to the computer that it successfully opened the drawer (not just successfully carried-out the command) ?

Keep us posted and thank you for using our service.
FixYa for all your troubleshooting needs.
6826030.png

May 06, 2008 | Epson TM-T88III Thermal Printer

2 Answers

How to eject cash drawer pos


Open the Cash Drawer
Hex code
<1B><70><30><40><50>

Apr 03, 2008 | Epson TM-U220 Matrix Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...