Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Our machine will not spin ,starts to build up revs then stops

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi just read your posting.Now when the machine stops does it beep and show a series of lights?If it does then the lights will be in a row of 8 lights.Starting from the left to right which lights are lit when the machine is beeping?Is it the 2nd and 4th or the 1st and 5th ---etc---?Please reply with additional information and I am sure I can help you rectify this fault.Looking forward to your reply.

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher and paykel washing machine top loader doesnt spin dry the clothes well. There isnt any water in the machine after the spin cycle but the clothes are heavy wet. What's could cause this?


Machine not spinning. Have you stood next to machine and listened? When all water is drained out (watch the drain hose for water to stop) then you should hear the spin start and hear it building up speed. If it doesn't then you need to post back here with more detail on what you could hear or see happening. i.e. how long after water stopped draining did machine finish and switch off?

Nov 05, 2016 | Fisher and Paykel Washing Machines

1 Answer

Whirlpool AWO/D 8708


F07 is a fault with the motor control, probably the triac has failed.

Jun 16, 2017 | Washing Machines

1 Answer

Classixx 1200 wfl2463gb/12


this can be one of two thing the pcb (circuit board) or could just be worn brushes that stops it
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 30, 2013 | Washing Machines

1 Answer

Hotpoint WML540 gets to spin then stops wont empty and all lights start flashing


hi sharon, i had simular problem, if your waste outlet from your machine to kitchen sink is pushed on to sink waste sometimes held with jubilee clip, disconnect it and check weather its clear cos it can get build up of ****** and stop water from draining, hope this helps.

Jul 08, 2012 | Hotpoint Washing Machines

1 Answer

Does not always spin


How old and is it on all loads? How fast to stop the machine when you lift the lid? Can you stop the tub while spinning, careful on this one?

Oct 03, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

No spin


Your problem is that the carbon brushes on the motor have worn out and need replacing.. eaisly done

Dec 10, 2007 | Zanussi FJS1225W Front Load Washer

1 Answer

Spins up, then stops.


Sounds like the problem could be in the tachometer. This is located on the shaft of the motor at the back and has wires going from it to the main wiring plug for the motor. The tachometer cannot be repaired and will have to be replaced.

Jan 25, 2007 | Neff V4380X0 Front Load Washer / Dryer

1 Answer

Machine Won't Stop


Junkman, going by your model number this looks like an electronic board. Try unplugging the machine at the wall and make sure all the connections to the board are secure. Sometimes in a humid enviroment, I don't know if yours is, corrosion can build up on the connections. Hope this solves the issue.

Jun 11, 2006 | GE Profile Prodigy WPSE4200A

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...